个人信息Personal Information
教授
博士生导师
硕士生导师
性别:男
毕业院校:大连理工大学
学位:博士
所在单位:材料科学与工程学院
学科:材料表面工程
办公地点:Room 218, School of Materials Science and Engineering
联系方式:0411-84707254
电子邮箱:xpzhu@dlut.edu.cn
Electrochemical properties of microarc oxidation films on a magnesium alloy modified by high-intensity pulsed ion beam
点击次数:
论文类型:期刊论文
发表时间:2011-11-25
发表刊物:16th International Conference on Surface Modification of Materials by Ion Beams (SMMIB)
收录刊物:SCIE、EI、CPCI-S、Scopus
卷号:206
期号:5
页面范围:874-878
ISSN号:0257-8972
关键字:Magnesium alloy; Microarc oxidation; High-intensity pulsed ion beam; Corrosion resistance; Electrochemical impedance spectrum
摘要:Microarc oxidation (MAO) films on AZ31 magnesium alloy were treated by high-intensity pulsed ion beam (HIPIB) irradiation with ion energy of 300 key at ion current density of 200 A/cm(2). A remelted layer of a few micrometers was produced on irradiated MAO films. The corrosion resistance of MAO films was characterized by potentiodynamic electrochemical test in 3.5% NaCl solution. The anodic polarization behavior of MAO samples exhibited a transition from the active anodic dissolution for the original one to the passivation-pitting breakdown for the modified films. The passivation-pitting breakdown voltage of modified films increased with multi-shot irradiation, i.e. from a value of -1420 mV(SCE) at 1 shot to -800 mV(SCE) at 5 shots, and the corresponding passivation current density decreased by two orders of magnitude. The irradiated MAO films have a higher corrosion potential than the original one, reaching a maximal value of -1350 mV(SCE) at 5 shots from the original -1580 mV(SCE). The electrochemical impedance spectrum (EIS) of modified MAO films was measured with varying the immersion time in 3.5% NaCl solution. The Nyquist impedance plots from modified films may show only a capacitive loop at the immersion time of 5 h, and the inductive loop occur at longer immersion time, whereas original films presenting both capacitive and inductive loops at all the immersion time. Bode plots of MAO films before and after irradiation were obviously distinguished in shape at low frequency range, especially at short immersion time. The evolution of Nyquist and Bode plots with immersion time was discussed in association with the processes of electrolyte penetration into the MAO structure and resultant reaction at the film-substrate interface. It is concluded that the improvement in the continuity and compaction of MAO films accounts for the enhanced corrosion resistance of the films irradiated by HIPIB. (C) 2011 Elsevier B.V. All rights reserved.