点击次数：

论文类型：期刊论文

发表时间：2018-01-01

发表刊物：JOURNAL OF ENERGETIC MATERIALS

收录刊物：SCIE

卷号：36

期号：4

页面范围：377-385

ISSN号：0737-0652

关键字：Aquarium test; continuous velocity probe; detonation pressure; impedance matching; inert materials

摘要：A novel velocity probe, which permits recording the continuous velocities of detonations and shock waves, has been developed based on the transition of operation principle from ionization to pressure-conduction. Using the new probe and the impedance matching method, a series of measuring devices were set up to obtain the shock wave velocities in different inert materials, i.e., water, Plexiglas and paraffin wax. Two test types of powder ammonium nitrate/fuel oil (ANFO), exposed on the ground and tamped in the blast hole, were performed, from which we calculated their detonation pressures, with a density of approximately 0.86 g.cm(-3), ranged from 3.52 GPa to 3.65 GPa, and the adiabatic exponents from 2.24 to 2.30. The results show that the present velocity probe-based method can be used to determine the detonation pressure of commercial explosives conveniently and reliably, which is an important supplement for the testing techniques of explosive performance.