Optimization of cryogenic milling parameters for aluminum honeycomb treated by ice fixation method
- 点击次数：
- 论文类型：期刊论文
- 发表时间：2018-12-01
- 发表刊物：INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- 收录刊物：SCIE、Scopus
- 卷号：99
- 期号：9-12,SI
- 页面范围：2271-2281
- ISSN号：0268-3768
- 关键字：Aluminum honeycomb; Cryogenic milling; Ice fixation; Machining
parameters optimization; Orthogonal experiment
- 摘要：This paper presents the first comprehensive investigation that aluminum honeycomb has inevitable machining defect in milling process, such as deformation, burr, and collapse. Ice fixation method was used to clamp workpieces, and inner-injection liquid nitrogen was employed for a series of cryogenic milling machining. In the machining process, the main machining parameters including in honeycomb orientation, milling width, cutting depth, cutting speed, and feed were executed experimental research. Meanwhile, the machining parameter optimization, range, and significant analysis were adopted to analyze the influence of machining parameters on the machining surface quality, as well as the optimal parameter combination and milling machining surface quality were predicted and verified. The results show that the ice fixation aluminum honeycomb method with cryogenic milling is much advanced than that of conventional ones, and many machining defects are effectively restrained. At the same time, the influence of machining parameters on machining qualities in descending order is cutting depth, cutting speed, honeycomb orientation, feed, and milling width. The minimum roughness value (Ra = 0.356 mu m) of the predicted machining surface is similar to the actual machining result (Ra = 0.362 mu m). It verifies the feasibility of the optimization method. Furthermore, it is proved that the ice fixation + liquid nitrogen cooling method has a positive effect on the high milling quality and implement efficiency for aluminum honeycomb and other difficult-to-machine materials.
- 发表时间：2018-12-01
