location: Current position: Home >> Scientific Research >> Paper Publications

Preparation and characterization of thermally stable poly(piperazine amide)/PPBES composite nanofiltration membrane

Hits:

Indexed by:期刊论文

Date of Publication:2011-03-15

Journal:JOURNAL OF MEMBRANE SCIENCE

Included Journals:Scopus、SCIE、EI

Volume:370

Issue:1-2

Page Number:91-96

ISSN No.:0376-7388

Key Words:Copoly(phthalazinone biphenyl ether sulfone); Nanofiltration membrane; Interfacial polymerization; Thermal stability

Abstract:Copoly(phthalazinone biphenyl ether sulfone) (PPBES) with excellent performance is utilized to fabricate the substrate membrane of the composite nanofiltration (NF) membrane and the functional layer of the NF membrane is prepared by the interfacial polymerization from piperazine (PIP) and trimesoyl chloride (TMC). The performances of the substrate ultrafiltration (UF) membrane such as molecular weight cut-off (MWCO) and hydrophilicity are also studied to improve the composite membrane performance. When the composite membrane is prepared under optimized conditions and tested at 1.0 MPa and 20 degrees C, the flux of the composite NF membrane is about 77 L/m(2) h and the Na(2)SO(4) rejection of it is about 97.5%. The surface morphologies of the composite membrane and substrate membrane are observed by scanning electron microscopy (SEM). The flux is increased from 61 to 290 L/m(2) h with the rejection of the membrane decreases 3.8% when the operation temperature increases from 18 degrees C to 85 degrees C at 1.0 MPa. (C) 2011 Elsevier B.V. All rights reserved.

Pre One:溶剂处理对PPESK中空纤维膜O_2/N_2分离性能的影响

Next One:含4-苯基二氮杂萘酮结构共聚芳酯的合成及性能