点击次数：

论文类型：期刊论文

发表时间：2015-01-01

发表刊物：MARINE STRUCTURES

收录刊物：SCIE、EI

卷号：40

页面范围：183-192

ISSN号：0951-8339

关键字：S-lay; Pipe; Finite element analysis; Loading history; Plastic deformation

摘要：In the deepwater S-lay operations depending on the required stinger radius and rollers configuration, relatively large plastic deformation is induced when the pipe passes over the stinger, under the combined loadings of bending, axial tension, roller reaction force and the pipelay vessel motion. The resulting plastic deformation does not vanish after the pipe leaves the stinger. It accumulates until the pipe reaches the seabed. The inherited residual deformation might reduce the collapse capacity of the pipe under the external pressure loading. The present paper investigates the dynamic loading history of the pipe during the S-lay operation based on a test-verified finite element model, and then calculates the residual plastic deformation of the pipe cross-section after the pipe reaches the seabed. Finally, the nonlinear collapse analysis is implemented based on the modified RIKS method to evaluate the capacity of the installation-induced deformed pipe. The results confirm that the deepwater S-lay operation will lead to obvious plastic deformation of the pipe, which decreases the pipe collapse capacity to some extent. (C) 2014 Elsevier Ltd. All rights reserved.