Release Time:2019-03-10  Hits:

Indexed by: Journal Article

Date of Publication: 2016-01-06

Journal: 12th International Conference on Protection and Restoration of the Environment (PRE)

Included Journals: CPCI-S、SCIE

Volume: 57

Issue: 25

Page Number: 11699-11711

ISSN: 1944-3994

Key Words: Falling film evaporator; Horizontal-tube bundle; Distributed parameter model; Distributions of parameters

Abstract: Three independent experiments which correspond to the characteristic study on the performance of the horizontal-tube falling film evaporators were carried out, and each came out with a validated model for its performance prediction. A comprehensive distributed parameter model was developed based on the above three models to simulate a large tube bundle consisting of 160 rows and 80 columns aluminum-brass tubes in a horizontal-tube falling film evaporator. The simulation was conducted with the superficial evaporation temperature on the shell side of 60 degrees C, the superficial overall temperature difference of 3.0 degrees C, the inlet brine salinity of 30g/kg, the inlet brine spray density of 0.06kg/ms, and the maximum steam inlet velocity of 40m/s. The non-uniform distributions of several thermal parameters are presented and discussed.