Wang Yuxin
Personal Homepage
Paper Publications
Fabrication of a thick copper-stainless steel clad plate for nuclear fusion equipment by explosive welding
Hits:

Indexed by:期刊论文

Date of Publication:2018-12-01

Journal:FUSION ENGINEERING AND DESIGN

Included Journals:SCIE、Scopus

Volume:137

Page Number:91-96

ISSN No.:0920-3796

Key Words:Explosive welding; Clad plate; ITER; Nuclear fusion

Abstract:TU1/316 l clad plates with a high thickness are used in nuclear fusion equipment as coil terminals. The technical specifications of clad plates for nuclear fusion equipment, such as the composite ratio, tensile strength, shear strength and scale of the interfacial wave, are significantly higher than those of clad plates for conventional applications. It is difficult to produce high-quality clad plates through explosive welding experiments alone. To manufacture high-quality TU1/316 L clad plates, the technical parameters of the explosive welding process were obtained and optimized by theoretical analysis and numerical calculations. A procedure for fabricating explosion bonded TU1/316 L clad plates was successfully determined through the combination of numerical calculations and experiments, and the bimetallic plates were used to manufacture international thermonuclear experimental reactor (ITER) components.

Personal information

Associate Professor
Supervisor of Master's Candidates

Title : 中国工程爆破行业协会爆炸加工行业委员会副秘书长

Gender:Male

Alma Mater:Dalian University of Technology

Degree:Doctoral Degree

School/Department:Department of Engineering Mechanics

Discipline:Computational Mechanics

Business Address:工程力学系226室

Click:

Open time:..

The Last Update Time:..


Address: No.2 Linggong Road, Ganjingzi District, Dalian City, Liaoning Province, P.R.C., 116024

MOBILE Version