Zhang Zhao
Professor Supervisor of Doctorate Candidates Supervisor of Master's Candidates
Main positions:Professor in Process Mechanics
Gender:Male
Alma Mater:Dalian University of Technology
Degree:Doctoral Degree
School/Department:Department of Engineering Mechanics, Dalian University of Technology
Discipline:mechanics of manufacturing process. Engineering Mechanics. Computational Mechanics
Business Address:Room 619,Integrated Laboratory building (1#)
Contact Information:+86-411-84708432 zhangz@dlut.edu.cn
E-Mail:zhangz@dlut.edu.cn
Hits:
Indexed by:期刊论文
Date of Publication:2016-01-01
Journal:兵器材料科学与工程
Included Journals:PKU、ISTIC、CSCD
Volume:39
Issue:3
Page Number:9-13
ISSN No.:1004-244X
Key Words:叶轮; 钨极惰性气体焊; 残余应力
Abstract:采用双椭球热源模型建立叶轮TIG焊接的移动热源模型,以计算得到的温度历史作为热载荷,计算焊缝附近的残余应力分布,通过对比已有的文献实验数据以验证
模型的有效性。进一步建立叶轮残余应力和残余变形的计算模型,分析焊接温度历史、叶轮应力和变形历史之间的内在联系,研究焊接参数和叶轮参数对焊后残余应
力和残余变形的影响规律。分析结果表明:在叶轮叶片焊接时,获得的热应力随焊接温度的增加而增加,当焊接温度达到峰值时,热应力滞后几秒达到最大值;随着
叶片厚度的增加,焊接变形略有减小,远离焊缝位置的叶片残余应力随叶片板厚增加而减小,同时叶片的残余应力和变形与叶片和叶轮的刚度比有关。
Zhang Zhao, Ph.D., Professor in Process Mechanics.
Editorial member in Coatings (IF:2.881) from 2020 to 2022.
Editorial member in Crystals (IF:2.589) from 2020 to 2022.
Younth editorial member in Journal of Central South University(IF:1.716) from 2020 to 2022.
Professor Zhang has published more than 60 SCI publications with over 1100 citations. He served as reviewers for more than 30 international journals. His main pulications can be found:
https://orcid.org/0000-0001-7181-8617
https://publons.com/researcher/1987190/zhao-zhang/
The scientific research focuses on experimental and numerical works on friction stir welding/processing/additive manufacturing, numerical modelling and simulation of additive manufacuring, topological design of phononic crystals, locomotive and high speed train design.
