location: Current position: Home >> Scientific Research >> Paper Publications

A Novel Vision-Based Pose Measurement Method Considering the Refraction of Light

Hits:

Indexed by:期刊论文

Date of Publication:2018-12-01

Journal:SENSORS

Included Journals:SCIE、PubMed、Scopus

Volume:18

Issue:12

ISSN No.:1424-8220

Key Words:triangular vision; pose parameters; machine vision; refraction; wind tunnel test

Abstract:Nowadays, due to the advantages of non-contact and high-speed, vision-based pose measurements have been widely used for aircraft performance testing in a wind tunnel. However, usually glass ports are used to protect cameras against the high-speed airflow influence, which will lead to a big measurement error. In this paper, to further improve the vision-based pose measurement accuracy, an imaging model which considers the refraction light of the observation window was proposed. In this method, a nonlinear camera calibration model considering the refraction brought by the wind tunnel observation window, was established first. What's more, a new method for the linear calibration of the normal vector of the glass observation window was presented. Then, combining with the proposed matching method based on coplanarity constraint, the six pose parameters of the falling target could be calculated. Finally, the experimental setup was established to conduct the pose measurement study in the laboratory, and the results satisfied the application requirements. Besides, experiments for verifying the vision measurement accuracy were also performed, and the results indicated that the displacement and angle measurement accuracy approximately increased by 57% and 33.6%, respectively, which showed the high accuracy of the proposed method.

Pre One:A novel approach to evaluate the delamination extent after edge trimming of carbon-fiber-reinforced composites

Next One:风洞模型振动抑制技术研究