任同群

个人信息Personal Information

副教授

硕士生导师

性别:男

毕业院校:天津大学

学位:博士

所在单位:机械工程学院

学科:测试计量技术及仪器. 精密仪器及机械

办公地点:机械知方楼6128

联系方式:0411-84707713

电子邮箱:ren_tq@dlut.edu.cn

扫描关注

论文成果

当前位置: 任同群 >> 科学研究 >> 论文成果

Electrohydrodynamic atomization deposition and mechanical polishing of PZT thick films

点击次数:

论文类型:期刊论文

发表时间:2016-08-15

发表刊物:CERAMICS INTERNATIONAL

收录刊物:SCIE、EI、Scopus

卷号:42

期号:11

页面范围:12623-12629

ISSN号:0272-8842

关键字:Electrohydrodynamic atomization deposition; PZT thick film; Mechanical polishing

摘要:In this work, electrohydrodynamic atomization deposition, combined with mechanical polishing, was used for the fabrication of dense and even PZT thick films. The PZT slurry was ball-milled and the effect of milling time on the characteristics of the deposited films was examined. A time of 50 h was found to be the optimum milling time to produce dense films. It was found that the PZT thick films presented rough surface after deposition. In order to overcome this drawback the mechanical polishing process was employed on the deposited films. After the mechanical polishing the roughness (Ra) and peak-to-peak height (Rz) of the film surface were decreased from 422 nm to 23 nm and from 5 pm to 150 nm, respectively. Subsequently, an increase of similar to 10 pC N-1 on piezoelectric constant (d(33.f)) was obtained. In addition, it was observed that the d(33) was increased from 57 pC N-1 to 89 pC N-1 when the thickness was increased from 10 mu m to 80 mu m. (C) 2016 Elsevier Ltd and Techna Group S.r.l. All rights reserved.