![]()
李涛
-
副教授
博士生导师
硕士生导师
- 性别：女
- 毕业院校：哈尔滨工业大学
- 学位：博士
- 所在单位：机械工程学院
- 学科：机械设计及理论. 工业工程. 机械制造及其自动化
- 办公地点：机械楼8027室
- 联系方式：18941330991
- 电子邮箱：litao@dlut.edu.cn
访问量：
-
[1] 李琦.基于神经网络的激光熔覆层面积及气孔率预测[J],应用激光,2021,40(1):29-34
-
[2] Zhichao Liu.Recent advances and current developments of molten pool temperature measurement for laser additive m[J],Recent Patents on Mechanical Engineering,2021,13(1):13-23
-
[3] Li, Xiangbo,Li, Tao,Shi, Bowen,Wang, Dong,Adnan, Muhammad,Lu, Huitian.The influence of substrate tilt angle on the morphology of laser cladding layer[J],SURFACE & COATINGS TECHNOLOGY,2020,391
-
[4] Peng, Shitong,Li, Tao,Zhao, Jiali,Guo, Yanchun,Lv, Shengping,Tan, George Z.,Zhang, Hongchao.Petri net-based scheduling strategy and energy modeling for the cylinder block remanufacturing und[J],ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING,2019,58:208-219
-
[5] Peng, Shitong,Li, Tao,Zhao, Jiali,Lv, Shengping,Tan, George Z.,Dong, Mengmeng,Zhang, Hongchao.Towards energy and material efficient laser cladding process: Modeling and optimization using a hy[J],JOURNAL OF CLEANER PRODUCTION,2019,227:58-69
-
[6] Li, Tao,Liu, Zhi-Chao,Zhang, Hong-Chao,Jiang, Qiu-Hong.Environmental emissions and energy consumptions assessment of a diesel engine from the life cycle [J],JOURNAL OF CLEANER PRODUCTION,2013,53:7-12
-
[7] 李涛.A system boundary identification method for life cycle assessment[J],INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT,2021,19(3):646-660
-
[8] 李涛.A PCA-based method for construction of composite sustainability indicators[J],INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT,2021,17(5):593-603
-
[9] Gao, Wang,Li, Tao,Tang, Zijue,Peng, Shitong,Zhang, Hong-chao.Investigation on the Comparative Life Cycle Assessment between Newly Manufacturing and Remanufactu[A],2017,61:750-755
-
[10] Peng, Shitong,Li, Tao,Wang, Yue,Liu, Zhichao,Tan, George Z.,Zhang, Hongchao.Prospective Life Cycle Assessment Based on System Dynamics Approach: A Case Study on the Large-Sca[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE
ASME,2019,141(2,SI)
-
[11] Peng, Shitong,Li, Tao,Li, Mengyun,Guo, Yanchun,Shi, Junli,Tan, George Z.,Zhang, Hongchao.An integrated decision model of restoring technologies selection for engine remanufacturing practi[J],JOURNAL OF CLEANER PRODUCTION,2019,206:598-610
-
[12] Jiang, Qiuhong,Liu, Zhichao,Liu, Weiwei,Li, Tao,Cong, Weilong,Zhang, Hongchao,Shi, Junli.A principal component analysis based three-dimensional sustainability assessment model to evaluate[J],JOURNAL OF CLEANER PRODUCTION,2018,187:625-637
-
[13] Wang F.,Li T.,Zhang H.-C.,Yuan C.Y..Exergy analysis of atomic layer deposition for Al2O3 nano-film preparation[A],2013,285-290
-
[14] Li T.,Zhuang J.,Zhang H.-C.,Liu Z.-C..Energy consumption assessment of remanufacturing processes[A],2013,649-653
-
[15] Shi, Junli,Li, Tao,Peng, Shitong,Liu, Zhichao,Zhang, Hongchao,Jiang, Qiuhong.Comparative Life Cycle Assessment of remanufactured liquefied natural gas and diesel engines in Ch[J],JOURNAL OF CLEANER PRODUCTION,2015,101:129-136
-
[16] Li T.,Yang J.,Zhang H.-C.,Yuan C..Chemical reaction thermodynamic model of low pressure CVD for Nano-TiO 2 film preparation[A],2012
-
[17] 郭燕春,董萌萌,李涛,彭世通,李梦云.零件再制造过程的不确定能耗建模与评估方法[J],大连理工大学学报,2019,59(1):45-52
-
[18] Liu, Zhichao,Jiang, Qiuhong,Cong, Weilong,Li, Tao,Zhang, Hong-Chao.Comparative study for environmental performances of traditional manufacturing and directed energy [J],INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY,2018,15(11):2273-2282
-
[19] 董萌萌,李涛,郭燕春,吴祖鹏,唐梓珏,彭世通.激光熔覆系统能耗建模分析方法研究[J],大连理工大学学报,2018,58(3):229-237
-
[20] 李梦云,李涛,彭世通,郭燕春.Batch Scheduling of Remanufacturing Flexible Job Shop for Minimal Electricity- and Time-Cost[A],2018,923:300-308
