沙建军

个人信息Personal Information

教授

博士生导师

硕士生导师

性别:男

毕业院校:日本京都大学

学位:博士

所在单位:力学与航空航天学院

学科:航空航天力学与工程. 材料学

电子邮箱:jjsha@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Improved microstructure and high temperature mechanical properties of C/C-SiC composites by introduction of ZrC nanoparticles

点击次数:

论文类型:期刊论文

发表时间:2020-04-15

发表刊物:CERAMICS INTERNATIONAL

收录刊物:EI、SCIE

卷号:46

期号:6

页面范围:8082-8091

ISSN号:0272-8842

关键字:Ceramic matrix composites; SiC-based composites; Microstructure; High temperature mechanical properties; Anti-oxidation resistance

摘要:ZrC nanoparticles were used to improve the microstructure and mechanical properties of C/C-SiC composites. It was found that the microstructural features and high temperature mechanical properties of C/C-SiC composites were dependent on the ZrC content. Microstructure analysis indicated that the introduction of ZrC nanoparticles effectively improved the distribution homogeneity of SiC matrix. With increasing the ZrC content, the distribution of SiC in the composites gradually transformed from a zonal distribution to a network structure distribution. The influence of ZrC content on the high temperature mechanical properties were investigated at elevated temperatures under ambient atmosphere. It was found that the introduction of ZrC nanoparticles could be an attractive way for improving the mechanical properties by the present processing route. The flexural strengths of all composites at RT increased with increasing the amount of ZrC. The CSZ10 exhibited the highest flexural strength at RT, which was about 196.1 MPa. Comparing with the CSZO, it increased by 47%. However, at 1000 degrees C, the CSZ8 composites exhibited the highest flexural strength (55.2 MPa) and a better strength retention (similar to 30%, compared with RT strength). The good strength retention could be attributed to a moderate fiber-matrix bonding strength and improved anti-oxidation resistance which were caused by the homogeneous distribution of SiC matrix.