论文成果
Vapor-melt Ratio in Laser Fine Cutting of Slot Arrays
- 点击次数：
- 论文类型：会议论文
- 发表时间：2011-01-01
- 收录刊物：CPCI-S、Scopus
- 文献类型：A
- 卷号：1353
- 页面范围：657-662
- 关键字：Laser fine cutting; Aluminum alloy; Slot array; Vapor-melt ratio;
Cutting quality
- 摘要：In order to improve cut quality for slot arrays, a new method of laser fine cutting under the consideration of the ratio of vapor to melt is presented. Laser cutting of 6063 aluminum alloy sheet, 0.5 mm in thickness, was carried out on a JK701H Nd:YAG pulse laser cutting system. The effects of vapor-melt ratio on kerf width, surface roughness and recast layer were studied which relate cutting qualities. Observation on the cut samples with different vapor-melt ratios (0.687, 1.574, 3.601 varied with laser power increasing, and 1.535, 3.601, 7.661 with decreasing of beam cutting speed) shows that high vapor-melt ratio improves laser cut quality clearly. Kerf width 0.2 mm of smooth area on kerf top area and thickness 2.03 mu m of recast layer are obtained. No dross was found on the kerf bottom and the percentage of the smooth area is up to 40% out of whole kerf side. The research on vapor-melt ratio provides a deeper understanding of laser cutting and improves laser cut quality effectively.
