location: Current position: Home >> Scientific Research >> Paper Publications

金属间化合物对钛合金与不锈钢的热轧焊过渡接头耐热性的影响

Hits:

Date of Publication:2022-10-09

Journal:Transactions of Nonferrous Metals Society of China

Affiliation of Author(s):运载工程与力学学部

Volume:23

Issue:7

Page Number:1966-1970

ISSN No.:1003-6326

Abstract:The effect of intermetallic compounds on the heat resistance of transition joint was investigated. The experiment of post-weld heat treatment for the hot roll bonded titanium alloy?stainless steel joint using nickels interlayer was carried out, and the interface microstructure evolution due to heat treatment was presented. There was not found significant interdiffusion at stainless steel/nickel interface, when the specimens were heat treated in the temperature range of 600?800 °C for 10 and 30 min, while micro-cracks occurred at the stainless steel/nickel interface heat treated at 700 °C for 30 min. The thickness of intermetallic layers at nickel/titanium alloy interface increased at 600 °C, and micro-cracks occurred at 700 and 800 °C. The micro-cracks occurred between intermetallic layers or between intermetallic layer and nickel interlayer as well. The tensile strength of the transition joint decreased with the increase of heat treatment temperature or holding time.

Note:新增回溯数据

Pre One:采用铌中间层的钛合金与不锈钢的真空热轧连接界面的显微组织及性能(英文)

Next One:金属间化合物对钛合金与不锈钢的热轧焊过渡接头耐热性的影响(英文)