Hits:

Date of Publication:2022-10-09

Journal:Transactions of Nonferrous Metals Society of China

Affiliation of Author(s):运载工程与力学学部

Volume:24

Issue:9

Page Number:2839-2844

ISSN No.:1003-6326

Abstract:The hot-roll bonding was carried out in vacuum between titanium alloy and stainless steel using niobium interlayer. The interfacial structure and mechanical properties were analyzed. The results show that the plasticity of bonded joint is improved significantly. When the bonding temperature is 800 °C or 900 °C, there is not intermetallic layer at the interface between stainless steel and niobium. When the bonding temperature is 1000 °C or 1050 °C, Fe-Nb intermetallic layer forms at the interface. When the bonding temperature is 1050 °C, cracking occurs between stainless steel and intermetallic layer. The maximum strength of~417.5 MPa is obtained at the bonding temperature of 900 °C, the reduction of 25%and the rolling speed of 38 mm/s, and the tensile specimen fractures in the niobium interlayer with plastic fracture characteristics. When the hot-roll bonded transition joints were TIG welded with titanium alloy and stainless steel respectively, the tensile strength of the transition joints after TIG welding is~410.3 MPa, and the specimen fractures in the niobium interlayer.

Note:新增回溯数据