location: Current position: Home >> Scientific Research >> Paper Publications

Laser Milling of Al(2)O(3) Ceramic Based on Deteriorative Layer Controlled

Hits:

Indexed by:会议论文

Date of Publication:2008-11-02

Included Journals:EI、CPCI-S、Scopus

Volume:83-86

Page Number:1-6

Key Words:Laser milling; Al(2)O(3) ceramic; Deteriorative layer controlled

Abstract:A new method for laser milling of Al(2)O(3) ceramic based on deteriorative layer controlled is presented in which no assistant gas was used during the laser milling. The new milling technology is developed by means of laser scanning of ceramic surface and forming a deteriorative layer directly. Laser milling parameters are determined through crystal phase's analysis of the deteriorative layer. The laser milling depth, surface quality, and milling mechanism with different milling parameters were studied systematically on an Nd: YAG CNC laser and multi-layer laser milling experiments were also conducted with optimized processes on the surface of Al(2)O(3) ceramic workpiece. Therefore, the practical experimental results are that each depth of layer milling is between 0.35-0.5 mm and the surface roughness of laser milling reaches to Ra 2-3.2 mu m. The experimental study has thus provided deeper understanding on laser milling technology for Al(2)O(3) ceramic both in theory and application.

Pre One:非离子型活性剂在ULSI碱性Cu抛光液中的性能

Next One:Predictive Force Model Based Variable Feedrate Scheduling for High-Efficiency NC machining