![]() |
个人信息Personal Information
教授
博士生导师
硕士生导师
任职 : 现任大连理工大学化工学院教授、博士生导师。同时担任“膜科学与技术”期刊编委,膜学会理事(筹),膜工业协会工程与应用专业委员会及特种分离膜专业委员会委员、中国兵工学会活性炭测试分析与应用研究分会委员等。
性别:男
毕业院校:大连工学院
学位:硕士
所在单位:化工学院
学科:化学工艺. 膜科学与技术. 功能材料化学与化工
办公地点:化工综合楼A201
联系方式:微信/电话 13500711370
电子邮箱:wangth@dlut.edu.cn
Effects of carbonization conditions on the properties of coal-based microfiltration carbon membranes
点击次数:
论文类型:期刊论文
发表时间:2008-02-01
发表刊物:JOURNAL OF POROUS MATERIALS
收录刊物:SCIE、EI
卷号:15
期号:1
页面范围:1-6
ISSN号:1380-2224
关键字:carbonization; coal; carbon membranes; microfiltration; pore structure
摘要:Carbon membranes, a novel porous inorganic membrane, have considerable potential applications in many industrial fields owing to their better stability in aggressive and adverse environments. However, the high cost of precursor materials has hampered their wide applications on commercial scale. In this study, coal, a cheap material, is used to prepare the tubular microfiltration carbon membranes. The effects of carbonization conditions on the properties of coal-based carbon membrane were investigated by the variation of the weight loss, shrinkage ratio of tube size and pore structure characteristics during carbonization. The results show that carbonization conditions greatly affect the properties of coal-based carbon membranes. The carbon membranes carbonized in the inert gases have more "open" porous structure and high gas flux compared to those carbonized in vacuum which makes the carbon membrane possess smaller pores and low gas flux. The carbonization temperature plays an important role in the determination of the pore structure and densification of carbon matrix. At the temperature below 600 degrees C, the pore structure and carbon matrix of carbon membrane are formed with more than 95% of the total weight loss and only 48% of the total size shrinkage ratio. The matrix of carbon membrane gets more compact with the temperature increasing from 600 degrees C to 900 degrees C, in which the size shrinkage ratio is up to 52% with only 5% of the total weight loss. The low heating rate should favor the preparation of the carbon membranes with small average pore size and narrow pore size distribution, and the high gas flow rate can produce the carbon membranes with large average pore size and high porosity.