Hits:

Indexed by:期刊论文

Date of Publication:2018-10-20

Journal:CONSTRUCTION AND BUILDING MATERIALS

Included Journals:SCIE

Volume:186

Page Number:1239-1246

ISSN No.:0950-0618

Key Words:Ceramsite; Hot mix asphalt mixture; Pavement performance; Thermal properties; Highway engineering

Abstract:The aim of this paper is to explore hot asphalt mixture (HMA) with potential cooling capacity through adding ceramsite. Ceramsite asphalt mixtures (CAM) are prepared by adding ceramsite to replace fine aggregate with different ratio. Marshall and pavement performance tests were performed to test the pavement performance of CAM. Indoor radiation and outdoor radiation tests are carried out to evaluate the thermal properties of CAM. Results indicate that the Marshall Stability and dynamic stability of CAM increase with the increasing ceramsite ratio from 0% to 60%. The retained MS and low temperature performance of CAM nearly do not change with ceramsite ratio, but the tensile strength ratio decreases with ceramsite ratio. However, all values of the tensile strength ratio are above the requirements of specification. In the aspect of the thermal properties of CAM, the addition of ceramsite can effectively reduce the thermal conductivity of asphalt mixtures. Also, ceramsite is helpful in reducing the temperature of pavement and enhancing the ability of heat resistance, and the optimal effect can reduce the bottom surface temperature about 2.6 degrees C when ceramsite ratio is 60%. Because of the improvement in the dynamic stability and the thermal conductivity, CAM can have a good rutting resistance and the recommended ceramsite ratio is 60%. (C) 2018 Elsevier Ltd. All rights reserved.