Hits:

Indexed by:期刊论文

Date of Publication:2021-01-29

Journal:PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE

Volume:231

Issue:9

Page Number:1609-1621

ISSN No.:0954-4062

Key Words:5-Axis machine tool; kinematical performance; spiral trajectory; abrupt curvature; toolpath optimization; computation burden

Abstract:The kinematical behavior of 5-axis machine tool introduced by toolpath calculation has a close relation with processing efficiency and quality of parts. For the category of sculptured surface parts with abrupt curvature, such as turbine blade and fixed guide vane, the most commonly utilized spiral contouring toolpath modes usually encounter some trouble during actual machining, the reason lies in the difficult tool orientation control near the edge of such parts. However, the global optimization for the spiral toolpath means increased computation burden, and so it is time consuming. In this paper, an efficient 5-axis toolpath optimization algorithm is presented, and the objective is to smooth the rotary axes' motion caused by drastically changed tool orientation on spiral toolpath for abrupt curvature parts machining. To reduce the computation burden, only path segments on the spiral trajectory-owned weak kinematic performance are selected for further optimizing. To obtain smoother motion for rotary axes, the specific optimization computation for the selected path segments is conducted in the Machine Coordinate System (MCS) instead of the Part Coordinate System (PCS). The optimization model is constructed and a related solution method is presented to ensure the high-performance optimization. The complete optimization algorithm is demonstrated on a spiral 5-axis toolpath for the turbine blade finish machining, and the result shows that only 25.9% optimization computation is needed compared with global optimization algorithm. And then, the actual machining experiments are carried out by using paraffin as cut material, and the machining time with optimized toolpath is decreased by 19.7% compared with initial toolpath. In addition, the surface quality of parts is significantly improved after conducting the optimization. This study proves that the proposed algorithm can significantly improve the processing efficiency and surface quality of parts with abrupt curvature and provides an efficient method to optimize the spiral 5-axis toolpath used for finish machining parts with abrupt curvature.