|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：机械工程学院
电子邮箱：jzyxy@dlut.edu.cn
扫描关注
- [61]李栋, 任宗金, 贾振元, Zhao, Liqi, 王飞.Stress analysis and simulation on piezoelectric quartz wafer under multidimensional forces[J],Materials Physics and Mechanics,2022,21(1):17-28
- [62]Liu H.-F., 贾振元, 王福吉, Zong F.-C..Study on a giant magnetostrictive actuator with constant output force[J],International Journal of Industrial and Systems Engineering,2022,13(2):197-218
- [63]任宗金, 贾振元, 张军, 高山, 尚妍.Study on a method of dynamic response function for the piezoelectric measurement system[J],Sensors and Transducers,2022,153(6):111-117
- [64]王晓煜, 贾振元, Lin, Sheng.Study of Giant Magnetostrictive Actuator Optimization PID Controller Based on System Identifica...[A],International Conference on Information Technology and Scientific Management,2022,887-+
- [65]王福吉, 贾振元, 刘巍, 刘慧芳, 赵显嵩.Study of Giant Magnetostrictive Thin Films with Gas Sensitive Layer for Use as Gas Concentratio...[J],IEEE SENSORS JOURNAL,2022,12(6):1703-1708
- [66]王福吉, 贾振元, 刘巍.Study on Characteristics of CU Substrate Giant Magnetostrictive Thin Film based in the Directio...[A],International Conference on Optoelectronics and Microelectronics (ICOM),2022,423-427
- [67]马建伟, 王福吉, 贾振元, 许强, Yang, Yan-yu.Study of machining parameter optimization in high speed milling of Inconel 718 curved surface b...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,75(1-4):269-277
- [68]王福吉, 张博宇, 贾振元, Zhao, Xiang, 王琦.Structural optimization method of multitooth cutter for surface damages suppression in edge tri...[J],Journal of Manufacturing Processes,2022,46:204-213
- [69]贾振元, 周明, 杨连文, 郭东明, 刘顺福.Study on the optimization for electrical discharge machining micro and small holes[J],Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering,2022,39(2):106-112
- [70]郭东明, 贾振元, Ji, T., Sheng, X.J., Jiang, L.H..Study on the CNC Grinding Machine Tool for the Radome[A],Advances in Grinding and Abrasive Processes: Selected Papers from the 12th Grinding and Machining Conference,2022,258-259:677-681
- [71]郭东明, 贾振元, Ji, T, Sheng, XJ, Jiang, LH.Study on the CNC grinding machine tool for the radome[J],KEY ENGINEERING MATERIALS,2022,259-2:677-681
- [72]刘华, 贾振元, 王福吉, Zong F..Study on the design method of giant magnetostrictive force sensor[A],2011 IEEE International Conference on Mechatronics and Automation, ICMA 2011,2022,1098-1103
- [73]董志刚, 康仁科, 贾振元.Study on the Subsurface Damage of Single Crystal MgO Substrates[A],11th International Symposium on Advances in Abrasive Technology,2022,389-390:7-12
- [74]董志刚, 康仁科, 贾振元.Study on the subsurface damage of single crystal MgO substrates[J],KEY ENGINEERING MATERIALS,2022,389-390:7-12
- [75]Lin, Sheng, 王晓煜, 贾振元.Study on the dynamic character of the six-axis heavy force sensor[A],International Conference on Measurement, Instrumentation and Automation (ICMIA 2012),2022,241-244:938-+
- [76]刘华, 贾振元, 王放.Study on hysteresis model of giant magnetostrictive sensing actuator based on neural network[J],中国机械工程,2022,22(5):570-575
- [77]马建伟, Lu, Xiao, 贾振元, Li, Guan-Lin, Ye, Tao, 刘巍.Subregional Process Method with Variable Parameters Based on a Potential Field in Slow Tool Servo...[J],Journal of Manufacturing Science and Engineering, Transactions of the ASME,2022,144(4)
- [78]Song, De-Ning, 马建伟, 贾振元, Qin, Feng-Ze, Zhao, Xiao-Xuan.Synergistic real-time compensation of tracking and contouring errors for precise parametric cur...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C JOURNAL OF ME,2022,232(19):3367-3383
- [79]马建伟, 贾振元, 王福吉.Surface re-design modelling technology for parts with complex curved surface based on performance...[A],Proceedings of the 11th International Conference on Frontiers of Design and Manufacturing,2022
- [80]卢晓红, 贾振元, 王华, 司立坤, 王鑫鑫, Jia.Surface roughness prediction model of micro-milling Inconel 718 with consideration of tool wear[J],International journal of nanomanufacturing,2022,12(1):93-108