location: Current position: Home >> Scientific Research >> Paper Publications

Numerical analysis and centrifuge modeling of shallow foundations

Hits:

Indexed by:期刊论文

Date of Publication:2014-04-01

Journal:CHINA OCEAN ENGINEERING

Included Journals:EI、ISTIC、SCIE、Scopus

Volume:28

Issue:2

Page Number:163-180

ISSN No.:0890-5487

Key Words:non-coaxial model; strain softening; FEM analysis; centrifuge test; shallow foundation

Abstract:The influence of non-coaxial constitutive model on predictions of dense sand behavior is investigated in this paper. The non-coaxial model with strain softening plasticity is applied into finite-element program ABAQUS, which is first used to predict the stress-strain behavior and the non-coaxial characteristic between the orientations of the principal stress and principal plastic strain rate in simple shear tests. The model is also used to predict load settlement responses and bearing capacity factors of shallow foundations. A series of centrifuge tests for shallow foundations on saturated dense sand are performed under drained conditions and the test results are compared with the corresponding numerical results. Various footing dimensions, depths of embedment, and footing shapes are considered in these tests. In view of the load settlement relationships, the stiffness of the load-displacement curves is significantly affected by the non-coaxial model compared with those predicted by the coaxial model, and a lower value of non-coaxial modulus gives a softer response. Considering the soil behavior at failure, the coaxial model predictions of bearing capacity factors are more advanced than those of centrifuge test results and the non-coaxial model results; besides, the non-coaxial model gives better predictions. The non-coaxial model predictions are closer to those of the centrifuge results when a proper non-coaxial plastic modulus is chosen.

Pre One:双向水平循环荷载下单桩承载力的离心模型实验

Next One:Generation of progressive wave in a drum centrifuge