Hits:

Indexed by:期刊论文

Date of Publication:2012-05-01

Journal:SURFACE AND INTERFACE ANALYSIS

Included Journals:SCIE、EI、Scopus

Volume:44

Issue:5

Page Number:548-553

ISSN No.:0142-2421

Key Words:PBO fiber; air DBD plasma; surface treatment; fiber tensile strength; PBO/PPESK composite; interface properties

Abstract:The interface of fibrous composites is a key factor to the whole properties of the composites. In this study, the effects of air dielectric barrier discharge (DBD) plasma discharge power density on surface properties of poly(p-phenylene benzobisoxazole) (PBO) fiber and the interfacial adhesion of PBO fiber reinforced poly(phthalazinone ether sulfone ketone) (PPESK) composite were investigated by several characterization methods, including XPS, SEM, signal fiber tensile strength, interlaminar shear strength, and water absorption. After the air DBD plasma treatment at a power density of 41.4 W/cm(3), XPS analysis showed that some polar functional groups were introduced on the PBO fiber surface, especially the emergence of a new oxygen-containing group (-O-C = O group). SEM observations revealed that the air DBD plasma treatment had a great influence on surface morphologies of the PBO fiber, while the signal fiber tensile strength results showed only a small decline of 5.9% for the plasma-treated fiber. Meanwhile, interlaminar shear strength value of PBO/PPESK composite was increased to 44.71 MPa by 34.5% and water absorption of the composite decreased from 0.46% for the untreated specimen to 0.27%. The results showed that the air DBD plasma treatment can effectively improve the properties of the PBO fiber surface and the PBO/PPESK composite interface. Results obtained from the above analyses also showed that both the fiber surface and the composite interface performance would be reduced when an undue plasma discharge power density was applied. Copyright (C) 2011 John Wiley & Sons, Ltd.