location: Current position: Home >> Scientific Research >> Paper Publications

Influence of Collecting Velocity on Fiber Orientation, Morphology and Tensile Properties of Electrospun PPESK Fabrics

Hits:

Indexed by:期刊论文

Date of Publication:2010-11-15

Journal:JOURNAL OF APPLIED POLYMER SCIENCE

Included Journals:SCIE、EI、Scopus

Volume:118

Issue:4

Page Number:2236-2243

ISSN No.:0021-8995

Key Words:electrospinning; poly(phthalazinone ether sulfone ketone) (PPESK); orientation; morphology; tensile properties

Abstract:Poly(phthalazinone ether sulfone ketone) (PPESK) is a novel kind of soluble thermoplastic resin with excellent thermal resistance properties. In this article, PPESK nonwoven fabrics were successfully prepared using electrospinning technique, and the influence of collecting velocity on fibers orientation, morphology and tensile properties was studied by changing the collecting velocity during electrospinning process. Results indicate that collecting velocity has a strong influence on fiber orientation and mechanical performance. When the collecting linear velocity increases from 0.36 to 3.35 m/s, fiber angular standard deviation is decreased from 63.8 degrees to 45.5 degrees, and tensile strength of PPESK fabrics is increased from 0.0246 to 3.677 MPa. However, when collecting velocity is higher than 3.35 m/s, fabrics tensile strength shows a declining tendency due to the breaking down of the fibers at a high of collecting speed. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 118: 2236-2243, 2010

Pre One:Synthesis and properties of chain-extended bismaleimide resins containing phthalide cardo structure

Next One:A Study of the Effect of Oxygen Plasma Treatment on the Interfacial Properties of Carbon Fiber/Epoxy Composites