location: Current position: Home >> Scientific Research >> Paper Publications

Cyclic deformation behaviors of AZ31B magnesium alloy in two different asymmetric loading manners

Hits:

Indexed by:期刊论文

Date of Publication:2017-03-24

Journal:MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Included Journals:SCIE、EI、Scopus

Volume:689

Page Number:134-141

ISSN No.:0921-5093

Key Words:AZ31B magnesium alloy; Low cycle fatigue; Texture; Cyclic softening; Twinning-detwinning

Abstract:The low cycle fatigue (LCF) behavior of AZ31B magnesium alloy with fiber texture was investigated in two asymmetric loading manners with strain ratios of R-epsilon=0 (named as T-T loading manner) and R-epsilon=-infinity(named as CC loading manner), respectively. It was found that {10-12} < 10-11 > extension twinning-detwinning occurred in the samples in both the manners. Although the characteristics of twinning-detwinning alternations in the two manners exhibited little difference, the mechanical behaviors were quite different. Detwinning was induced during tensile unloading in the T-T manner and resulted in an evident Bauschginer effect, and cyclic softening in the tension was observed. The LCF life in this case was 68 cycles. In contrast, cyclic hardening occurred in both the tension and compression in the C-C manner with a life of 53 cycles. The twinning-detwinning contribution to the plastic strain-range was reduced especially in the C-C manner. The difference of twinning-detwinning contribution to the plastic strain-range between the two loading manners was responsible for the different LCF lives.

Pre One:Grain refinement and mechanical properties improvement of AZ31 Mg alloy sheet obtained by two - stage rolling

Next One:Effect of solution heat treatment on the precipitation behavior and strengthening mechanisms of electron beam smelted Inconel 718 superalloy