|
个人信息Personal Information
讲师
硕士生导师
性别：女
毕业院校：大连理工大学
学位：博士
所在单位：机械工程学院
办公地点：机械工程学院知方楼7130室
联系方式：
电子邮箱：
扫描关注
- [1]刘莹.杨勇,于同敏,马赛,祝铁丽.赵雪利.超声振动对不同含量碳纤维增强聚丙烯制件性能的影响[J],高分子材料科学与工程,2024,39(12):80-87
- [2]刘莹.陈越,赵雪利,于同敏,祝铁丽.超声辅助注射成形碳纤维增强聚丙烯制件性能研究[J],China Mechanical Engineering,34(16):1975-1981
- [3]祝铁丽.王敏杰,Sheng Zhanhui.Experimental Study of Shrinkage Displacements of Points on Injection Molded Parts[J],Chinese Journal of Mechanical Engineering,2022,23(5):553-559
- [4]刘莹.祝铁丽,毕杰,于同敏,赵丹阳.Investigation on Microstructures and Mechanical Properties of Isotactic Polypropylene Parts Fabricated by Different Process Conditions with Different Aging Periods[J],Polymers,2022,12(12):2828-2828
- [5]祝铁丽.周龙,Yan, W..Measurement for the Microchannel Width of Injection Molded Micro-fluidic Chips by Digital Image Processing of Micro Flat Photos[A],ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIII, VOL II,2022,628-629:393-397
- [6]祝铁丽.Measurement for the Microchannel Width of Injection Molded Micro-fluidic Chips by Digital Image Processing of Micro Flat Photos[J],MATERIALS SCIENCE FORUM,2022,628(9):393-398
- [7]祝铁丽.刘莹,于同敏.Preliminary Study of In-mold Shrinkage in Injection Molding Process[A],8th International Conference on Frontiers of Design and Manufacturing,2022
- [8]祝铁丽.宋满仓,王敏杰.Research on Visualization Device for Shrinkage of Injection Molded Parts[A],8th International Conference on Frontiers of Design and Manufacturing,2022
- [9]王文智.祝铁丽,孙先成.可折叠多功能拐杖的研制[J],大科技 百科新说,2020(12):217-218
- [10]张强.祝铁丽.基于MoldFlow软件优化设计注塑制件的浇口位置[J],电加工与模具,2006(6):41-43