Indexed by:会议论文
Date of Publication:2008-09-20
Included Journals:EI
Volume:53-54
Page Number:203-208
Abstract:Potassium dihydrogen phosphate (KDP) crystal is widely used in navigates spaceflight, national defenses, energy sources and information technology fields based on its excellent nonlinear optical property. Surface quality of KDP crystal influences the property and life time of the device directly. So detection and analysis of the damage induced during machining process, especially on subsurface, should be solved. In this paper, surface damage of the KDP crystal, which machined from #600 grinding wheel with different feed rate, was detected by optical microscope. Cross section and selective etching were used to analyzing the subsurface damage. Because #600 grinding wheel mainly used in coarse grinding and the removal rate is high, the results shown that there was obvious scratch, crack and crushing on the machining surface. When the feed rate is 10μm and 40μm, the subsurface damage depth is 7.41 μm and 8.96μm corresponding. This study is a kind of guide for following precision grinding, polishing machining time and removal amount.
Professor
Supervisor of Doctorate Candidates
Supervisor of Master's Candidates
Title : 国际磨粒技术学会(International Committee of Abrasive Technology, ICAT)委员,中国机械工程学会极端制造分会副主任、生产工程分会常务委员、微纳米制造技术分会常务委员,中国机械工程学会生产工程分会磨粒加工技术专业委员会副主任、切削加工专业委员会常委委员、精密工程与微纳技术专业委员会常委委员,中国机械工程学会特种加工分会超声加工技术委员会副主任,中国机械工程学会摩擦学分会微纳制造摩擦学专业委员会常务委员,中国机械工业金属切削刀具协会切削先进制造技术研究会常务理事、对外学术交流工作委员会副主任、切削先进制造技术研究会自动化加工技术与系统委员会副主任。
Gender:Male
Alma Mater:西北工业大学
Degree:Doctoral Degree
School/Department:机械工程学院
Discipline:Mechanical Manufacture and Automation. Mechatronic Engineering. Manufacturing Engineering of Aerospace Vehicle
Business Address:机械工程学院7191
Open time:..
The Last Update Time:..