Indexed by:Journal Papers
Date of Publication:2015-07-01
Journal:PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
Included Journals:SCIE、EI
Volume:41
Page Number:96-101
ISSN No.:0141-6359
Key Words:Micro-scale gap; Hydrostatic support; Electrogenerated chemical polishing; Roughness; Flatness
Abstract:In the electrogenerated chemical polishing (EGCP), material removal rate (MRR) is inversely proportional to the processing gap. To polish a workpiece with a large area, high and uniform MRR is necessary, which prefers a small and uniform processing gap. Based on the principle of the hydrostatic support, a novel micro-gap control method is proposed. The method uniformly controls the gap between the electrode and workpiece to a micro level over a large area. A relationship between the gap size and the inlet pressure is derived theoretically and verified experimentally. The proposed method is successfully applied to the polishing of a Cu surface with a diameter of 50 mm. Promising results are obtained that surface roughness and flatness are reduced from average roughness (Ra) 82 nm and peak-to-valley (PV) value 290 nm to Ra 4 nm and PV 120 nm, respectively. (C) 2015 Elsevier Inc. All rights reserved.
Professor
Supervisor of Doctorate Candidates
Supervisor of Master's Candidates
Title : 国际磨粒技术学会（International Committee of Abrasive Technology, ICAT）委员，中国机械工程学会极端制造分会副主任、生产工程分会常务委员、微纳米制造技术分会常务委员，中国机械工程学会生产工程分会磨粒加工技术专业委员会副主任、切削加工专业委员会常委委员、精密工程与微纳技术专业委员会常委委员，中国机械工程学会特种加工分会超声加工技术委员会副主任，中国机械工程学会摩擦学分会微纳制造摩擦学专业委员会常务委员，中国机械工业金属切削刀具协会切削先进制造技术研究会常务理事、对外学术交流工作委员会副主任、切削先进制造技术研究会自动化加工技术与系统委员会副主任。
Gender:Male
Alma Mater:西北工业大学
Degree:Doctoral Degree
School/Department:机械工程学院
Discipline:Mechanical Manufacture and Automation. Mechatronic Engineering. Manufacturing Engineering of Aerospace Vehicle
Business Address:机械工程学院7191
Open time:..
The Last Update Time:..
