点击次数：

论文类型：期刊论文

发表时间：2014-01-02

发表刊物：INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

收录刊物：SCIE、EI、Scopus

卷号：39

期号：1

页面范围：258-266

ISSN号：0360-3199

关键字：Steam reforming of methanol; Molybdenum carbide; TPR method; Transition metal; Hydrogen production

摘要：Various transition metals (M = Pt, Fe, Co, and Ni) were selected to support on molybdenum carbides by in-situ carburization metal-doped molybdenum oxide (M-MoOx) via temperature-programmed reaction (TPR) with a final temperature of 700 degrees C in a reaction gas mixture of 20% CH4/H-2. XRD analysis results indicated that beta-Mo2C phase was formed in the case of Fe, Co, or Ni doping while alpha-Mo2C phase was appeared with the beta-MoC1-x phase in the case of Pt doping. With the increase in Pt doping amount, more alpha-MoC1-x phase was produced. As-prepared metal doped molybdenum carbides were investigated as alternative catalysts for the steam reforming of methanol. Comparing with the undoped molybdenum carbide such as beta-Mo2C, metal-doped one showed higher methanol conversion and hydrogen yield. It is found that Pt doped molybdenum carbide had the highest catalytic activity and selectivity among the prepared catalysts and methanol conversion reached 100% even at a temperature as low as 200 degrees C, and remained a long-time stability with a stable methanol conversion. Copyright (C) 2013, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.