location: Current position: Home >> Scientific Research >> Paper Publications

Thermal analysis and products distribution of dried sewage sludge pyrolysis

Hits:

Indexed by:期刊论文

Date of Publication:2014-01-01

Journal:JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Included Journals:SCIE、EI

Volume:105

Issue:105

Page Number:43-48

ISSN No.:0165-2370

Key Words:Sewage sludge; Pyrolysis; XRF; TG-FTIR

Abstract:Pyrolysis behavior of dried sewage sludge was studied by thermogravimetric-Fourier transforms infrared analysis (TG-FTIR) and differential scanning calorimetry (DSC) to investigate thermal decomposition and kinetics analysis. A tubular pyrolyzer was used to explore the production distribution of dried sewage sludge pyrolysis under different runs. The results showed that two weight loss peaks were presented in pyrolysis reaction in the ranges of 186-296 C and 296-518 C, and the activation energy of each stage was 82.284 kJ mol(-1) and 48.342 kJ mol(-1), respectively. The main gases identified by FTIR analysis were CH4, CO2, CO and organic volatile compounds such as aldehydes, acids, alcohols and phenols. Under fast pyrolysis of dried sewage sludge, the maximum tar yield obtained was 46.14% at the temperature of 550 C. The concentrations of all gases increased steadily with increasing pyrolysis temperature from 450 C to 650 degrees C except for CO2. (C) 2013 Elsevier B.V. All rights reserved.

Pre One:Study of the fast pyrolysis of oilfield sludge with solid heat carrier in a rotary kiln for pyrolytic oil production

Next One:Modeling and simulation of oil sludge pyrolysis in a rotary kiln with solid heat carrier: Considering the particle motion and reaction kinetics.