location: Current position: Home >> Scientific Research >> Paper Publications

Study of the fast pyrolysis of oilfield sludge with solid heat carrier in a rotary kiln for pyrolytic oil production

Hits:

Indexed by:期刊论文

Date of Publication:2014-01-01

Journal:JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Included Journals:SCIE、EI

Volume:105

Page Number:183-190

ISSN No.:0165-2370

Key Words:Oilfield sludge; Flash pyrolysis; Solid heat carrier; Pyrolytic oil

Abstract:In this work, an experimental study of flash pyrolysis of oilfield sludge in different operation conditions was carried out under inert condition in a rotary kiln reactor. The effects of pyrolysis temperature, mixture ratio (MR) of sludge and solid heat carrier on the characteristics of product distribution were investigated. The composition of oils obtained from extraction and pyrolysis process were analyzed by Fourier transform infrared spectroscopy (FT-IR) and gas chromatography-mass spectrometry (GC-MS), respectively. The results indicated that, the maximum oil yield was achieved at temperature of 550 C and MR of 1:2, which was 28.98% (wt% of sludge oil) and oil recovery rate was 87.9% basing on the oil content in the sludge. High fraction of saturates (72.5%) was obtained at 550 C. The increasing temperature and solid heat carrier favor of pyrolysis gases increase. FT-IR analysis of pyrolytic oils shows that the oils have similar IR features as extraction oils. The pyrolytic oil was also found to contain the major linear chain hydrocarbons in the range of C-13-C-25. (C) 2013 Elsevier B.V. All rights reserved.

Pre One:Municipal Solid Waste Management in the Overwhelming Urbanization Towns around the Big City: A Case Study for the Satellite Towns of Dalian, China

Next One:Thermal analysis and products distribution of dried sewage sludge pyrolysis