location: Current position: Home >> Scientific Research >> Paper Publications

Characterization of InGaN by Means of I-V Measurements of Respective Light-Emitting Diode (LED) by DLTS

Hits:

Indexed by:期刊论文

Date of Publication:2015-01-01

Journal:ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING

Included Journals:SCIE

Volume:40

Issue:1

Page Number:263-268

ISSN No.:2193-567X

Key Words:Semiconducting indium gallium nitride materials; I-V characteristics; Deep-level transient spectroscopy ( DLTS) of the material; Light-emitting diode

Abstract:Indium gallium nitride (InGaN) has been characterized by means of deep-level transient spectroscopy (DLTS). The current-voltage measurement of respective schottky diode is performed by standard method available in our DLTS setup. The current-voltage measurement of InGaN is performed at various temperatures under same biasing conditions. From these measurements, the behavior of the materials is studied in detailed and listed in the following: The ideality factor, calculated to be 8.839, is found to increase with decreasing temperature of the material. However, values increased with decrease in temperature for the material. The higher value of ideality factor is attributed to high diffusion or tunneling current. The barrier height of InGaN is calculated as 0.851 eV which decreased with decrease in temperature. The change in the barrier height is related to the effective leakage current at high temperature. In InGaN, the value of reverse saturation current at room temperature is calculated as 8.22 x 10(-11) A, and the calculated values are found to decrease at lower temperatures.

Pre One:Directional growth of bulk silicon from silicon-aluminum-tin melts

Next One:Preparation and properties of rigid carbon felt thermal insulation