|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：吉林工业大学
学位：博士
所在单位：机械工程学院
电子邮箱：pinghu@dlut.edu.cn
扫描关注
- [101]祝雪峰, 胡平.Bi-directional evolutionary method using NURBS interpolation for optimal design of 3D continuum ...[A],2016
- [102]祝雪峰, 胡平.板面内自由振动的等几何分析[A],2016
- [103]高俊杰, 姚宝珍, 岳明, 胡平.车辆工程专业交叉学科类课程教学改革实践与探讨[J],实验室科学,2016,19(6):23-26
- [104]Yang Lei, Li Baojun, Hu Ping.Element Mesh Deformation with the Skeleton-Section Template[J],Computer-Aided Design,2016,73(4):11-25
- [105]Xiaoda, Li, Xiangkui, Zhang, Ping, Hu, Xianghui, Zhan, Hu(pinghu56@gmail.com).Thermo-mechanical coupled stamping simulation about the forming process of High-Strength Steel sh...[J],International Journal of Control and Automation,2016,9(1):93-102
- [106]Li, Xiaoda, Zhang, Xiangkui, Hu, Ping.Forming simulation and influencing factors analysis of hot stamping steel sheet[J],Revista Tecnica de la Facultad de Ingenieria Universidad del Zulia,2016,39(2):102-109
- [107]胡平, 祝雪峰.考虑结构自重的基于NURBS插值的3D拓扑描述函数法研究[J],力学学报,2016,1(1):1-5
- [108]孙宏图, 王健, 何士龙, 申国哲, 胡平.铝合金薄壁方管轴向冲击变形及断裂行为研究[J],机械强度,2016,38(2):364-368
- [109]胡清元, 夏阳, 胡平, 张万喜, Hu, Ping(pinghu@dlut.edu.cn).假设位移拟协调平面单元应变离散算法研究[J],工程力学,2016,33(9):30-39
- [110]祝雪峰, 胡平.Hierarchical B++ Splines with Applications to Isogeometric Analysis[A],2016
- [111]Wang, Xuan, Zhu, Xuefeng, Hu, Ping, P (reprint author), Dalian Univ Technol, Sch Automot Engn, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Isogeometric finite element method for buckling analysis of generally laminated composite beams...[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2015,104:190-199
- [112]Wang, Changsheng, Qi, Zhaohui, Hu, Ping, Zhang, Xiangkui, CS (reprint author), Dalian Univ Technol, Sch Automot Engn, Dalian 116024, Peoples R China..LINEAR AND GEOMETRICALLY NONLINEAR ANALYSIS WITH 4-NODE PLANE QUASI-CONFORMING ELEMENT WITH INT...[J],ACTA MECHANICA SOLIDA SINICA,2015,28(6):668-681
- [113]Song M., Li B., Zhao D., Ding S., Hu P., Jin C., Li, B., School of Automotive Engineering, Dalian University of TechnologyChina, email: bjli@dlut.edu.cn.Vehicle model recognition based on SURF[J],Journal of Information and Computational Science,2015,12(17):6249-6256
- [114]盈亮, 赵荣秀, 高天涵, 胡平, 郭威, Hu, Ping(pinghu@dlut.edu.com).22MnB5硼钢的气雾淬火工艺参数优化[J],材料热处理学报,2015,36(10):230-235
- [115]盈亮, 张富博, 戴明华, 余洋, 胡平.基于侧碰的热冲压强度梯度车身结构仿真优化[A],2015,Vol.3:1001-1004
- [116]赵艳荣, 胡平, 梁继才, 张文杰.碳纤维复合材料在汽车工业中的应用[J],合成树脂及塑料,2015,32(5):95-98
- [117]Zhang, Hua-Wei, Liu, Xiang-Hua, Li-Zhong, Hu, Ping, Wu, Jia-Lu, HW (reprint author), Northeastern Univ, Sch Mech Engn & Automat, Shenyang 110819, Peoples R China..Study on Nonuniform Deformation of Tailor Rolled Blank During Uniaxial Tension[J],ACTA METALLURGICA SINICA-ENGLISH LETTERS,2015,28(9):1198-1204
- [118]王长生, 张向奎, 胡平.拟协调方法的新公式:一个简单的拟协调四节点平面膜元[A],2015,159-159
- [119]韩啸, 李伟东, 胡平, 侯文彬.结构胶接接头在湿-热-力耦合环境下的力学性能退化行为建模研究[A],2015,149-149
- [120]胡清元, 夏阳, 胡平.基于EGQC方法的多套函数Timoshenko梁[A],2015,306-306