|
个人信息Personal Information
副教授
硕士生导师
性别：男
毕业院校：吉林大学
学位：博士
所在单位：力学与航空航天学院
学科：固体力学. 车辆工程
办公地点：2号实验楼316A
电子邮箱：sgz@dlut.edu.cn
扫描关注
- [1]张向奎, 申国哲, 许博, 郑国君, 胡平, 李伟东.各向异性对平板裂纹扩展路径的影响研究[J],计算力学学报,2024,40(5):815-820
- [2]申国哲, Wang, Ruiyang, Xia, Yang, 郑国君.基于近场动力学的薄板弯曲大变形及断裂分析[J],Chinese Journal of Theoretical and Applied Mechanics,55(2):381-389
- [3]杨淑超, 郑国君, Xia, Yang, 申国哲.A 3D peridynamic model for fracture analysis of transversely isotropic solids[J],ENGINEERING FRACTURE MECHANICS,297
- [4]申国哲, 李伟东, Xu, Bo, 夏阳, 郑国君.A general anisotropic peridynamic plane model based on micro-beam bond[J],Computational Mechanics,2024,71(6):1065-1079
- [5]申国哲, 毕紫微, 夏阳, 郑国君.An orthotropic peridynamic shell model for linear elastic deformation and crack propagation[J],Engineering Fracture Mechanics,282
- [6]郑国君, Zhang, Bolin, Xia, Yang, 申国哲.Coupled peridynamic model for geometrically nonlinear deformation and fracture analysis of thin s...[J],Computer Methods in Applied Mechanics and Engineering,2024,424
- [7]郑国君, 厉润锦, 申国哲, 张向奎.A parallel acceleration GPU algorithm for large deformation of thin shell structures based on per...[J],ENGINEERING WITH COMPUTERS,2024
- [8]申国哲, 王天泽, 郑国君, 夏阳.Peridynamic contact models for fracture analysis based on the micro-beam bond[J],Engineering Analysis with Boundary Elements,2024,166
- [9]申国哲, 赵振峰, 夏阳, 胡平, 郑国君.An elastoplastic peridynamic beam model for large bending deformation and fracture analysis[J],ENGINEERING FRACTURE MECHANICS,2024,306
- [10]夏阳, Meng, Xianghui, 申国哲, 胡平, 郑国君.Isogeometric analysis of cracks with peridynamics[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2022,377
- [11]胡平, 张金女, 林发财, 刘立忠, 申国哲.应力状态对模具分区冷却热成形S-rail硬度分布的影响[J],吉林大学学报 工学版,2022,2:500-504
- [12]申国哲, 葛永鹏, 刘立忠, 赵坤民.工艺参数对 AA5754铝合金温成形回弹的影响[J],华中科技大学学报 自然科学版,2022,8:111-114
- [13]申国哲, 李效文, 盈亮, 史栋勇, 郭润清, 孟召焕.基于硬度梯度的热成形高强钢弯曲性能研究[J],农业机械学报,2022,2:261-266
- [14]Zheng, Guojun, Shen, Guozhe, Hu, Ping, Xia, Yang.Coupling approach of isogeometric analysis with non-ordinary state-based peridynamics[J],EUROPEAN JOURNAL OF MECHANICS A-SOLIDS,2020,82
- [15]孙宏图, 申国哲, 胡平, 杨姝, 刘波, 周定陆.考虑碰撞安全性的汽车车身轻量化设计[J],机械科学与技术,2010,29(3):379
- [16]叶辉, 申国哲, 孙宏图, 杨姝, 胡平.利用高强度钢板温热成形结构件改善车身侧面抗撞性能[J],吉林大学学报（工学版）增刊,2010,40:101-105
- [17]周平, 郭威, 申国哲, 胡平.薄板成形模拟中切边回弹算法[J],吉林大学学报. 工学版,2010,40(4):931-936
- [18]胡平, 张向奎, 申国哲, 侯文彬, 靳春宁, 郭威.专用计算力学软件自主开发与平台建设的若干问题[A],2007,1
| |