Zhang Zhao
Professor Supervisor of Doctorate Candidates Supervisor of Master's Candidates
Academic Titles:Professor in Process Mechanics
Gender:Male
Alma Mater:Dalian University of Technology
Degree:Doctoral Degree
School/Department:Department of Engineering Mechanics, Dalian University of Technology
Discipline:mechanics of manufacturing process. Engineering Mechanics. Computational Mechanics
Business Address:Room 619,Integrated Laboratory building (1#)
Contact Information:
E-Mail:
Hits:
Date:2019-10-15
Indexed by:Journal Article
Date of Publication:2007-11-01
Journal:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Included Journals:Scopus、EI、SCIE
Volume:35
Issue:1-2
Page Number:86-100
ISSN:0268-3768
Key Words:friction stir welding; finite element method; material behavior; equivalent plastic strain; contact pressure
Abstract:This paper presents the 3D material flows and mechanical features under different process parameters by using the finite element method based on solid mechanics. Experimental results are also given to study the effect of process parameters on joining properties of the friction stir welds. Numerical results indicate that the tangent flow constitutes the major part in the material flow. The shoulder can accelerate the material flow on the top half of the friction stir weld. The distribution of the equivalent plastic strain can correlate well with the microstructure zones. Increasing the angular velocity of the pin, the material in the nugget zone can be more fully mixed, which improves the joining quality of the two welding plates. The increase of speeds, including the rotational speed and the translational speed, can both accelerate the material flow, especially in front of the pin on the retreating side where the fastest material flow occurs. The contact pressure on the pin-plate interface is decreased with the increase of the angular velocity.
Zhang Zhao, Ph.D., Professor in Process Mechanics.
Editorial member in Coatings (IF:2.881) from 2020 to 2022.
Editorial member in Crystals (IF:2.589) from 2020 to 2022.
Younth editorial member in Journal of Central South University(IF:1.716) from 2020 to 2022.
Professor Zhang has published more than 60 SCI publications with over 1100 citations. He served as reviewers for more than 30 international journals. His main pulications can be found:
https://orcid.org/0000-0001-7181-8617
https://publons.com/researcher/1987190/zhao-zhang/
The scientific research focuses on experimental and numerical works on friction stir welding/processing/additive manufacturing, numerical modelling and simulation of additive manufacuring, topological design of phononic crystals, locomotive and high speed train design.
