|
个人信息Personal Information
教授
博士生导师
硕士生导师
主要任职：Professor Dr. Hongbin Ding
其他任职：物理学院学术委员会主任，等离子体联合研究中心主任,中国光学工程学会LIBS专委会副主任, 中国核学会核聚变等离子体分会常务理事，辽宁省物理学会副理事长，国际ITER-ITPA 委员
性别：男
毕业院校：巴塞尔大学
学位：博士
所在单位：物理学院
学科：等离子体物理. 光学工程
联系方式：hding@dlut.edu.cn
电子邮箱：hding@dlut.edu.cn
Scaling of divertor power footprint width in RF-heated type-III ELMy H-mode on the EAST superconducting tokamak
点击次数：
论文类型：期刊论文
发表时间：2014-11-01
发表刊物：14th InternationalWorkshop on H-mode Physics andTransport Barriers
收录刊物：SCIE、EI、CPCI-S、Scopus
卷号：54
期号：11,SI
ISSN号：0029-5515
关键字：power footprint width; divertor configurations; RF-heated scheme; EAST
摘要：Dedicated experiments for the scaling of divertor power footprint width have been performed in the ITER-relevant radio-frequency (RF)-heated H-mode scheme under the lower single null, double null and upper single null divertor configurations in the Experimental Advanced Superconducting Tokamak (EAST) under lithium wall coating conditioning. A strong inverse scaling of the edge localized mode (ELM)-averaged power fall-off width with the plasma current (equivalently the poloidal field) has been demonstrated for the attached type-III ELMy H-mode as lambda(q) proportional to I-p(-1.05) by various heat flux diagnostics including the divertor Langmuir probes (LPs), infra-red (IR) thermograph and reciprocating LPs on the low-field side. The IR camera and divertor LP measurements show that lambda(q,IR) approximate to lambda(q,div-LPs)/1.3 = 1.15 B-p,omp(-1.25), in good agreement with the multi-machine scaling trend during the inter-ELM phase between type-I ELMs or ELM-free enhanced D-alpha (EDA). H-mode. However, the magnitude is nearly doubled, which may be attributed to the different operation scenarios or heating schemes in EAST, i.e., dominated by electron heating. It is also shown that the type-III ELMs only broaden the power fall-off width slightly, and the ELM-averaged width is representative for the inter-ELM period. Furthermore, the inverse I-p (Bp) scaling appears to be independent of the divertor configurations in EAST. The divertor power footprint integral width, fall-off width and dissipation width derived from EAST IR camera measurements follow the relation, lambda(int) congruent to lambda(q) + 1.64S, yielding lambda(EAST)(int) = (1.39 +/- 0.03)lambda(EAST)(q) + (0.97 +/- 0.35) mm. Detailed analysis of these three characteristic widths was carried out to shed more light on their extrapolation to ITER.