|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：力学与航空航天学院
学科：工程力学. 计算力学. 航空航天力学与工程
办公地点：系楼504
联系方式：yczhang@dlut.edu.cn
电子邮箱：yczhang@dlut.edu.cn
扫描关注
- [21]张南, 张永存, 陈文炯, 吴书豪, 刘书田, Liu, Shutian(stliu@dlut.edu.cn).含流道微桁架夹层面板隔热性能评估方法[J],复合材料学报,2017,34(4):850-858
- [22]张永存.Experimental and Numerical Study of Metallic Honeycomb heat exchanger with the graded pore sizes[A],2017
- [23]张永存.热相关的优化设计与增材制造[A],2017
- [24]张永存.面向相变温控的梯度金属多孔材料导热增强设计[A],2017
- [25]张永存.最大温度最小的瞬态传热结构的拓扑优化设计方法研究[A],2017
- [26]Liu, Yang, Zhang, Yongcun, Shutian, Xiao, Shan, Sun, Yanpeng, Wang, Xiangming, ST (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Effect of unbonded areas around hole on the fatigue crack growth life of diffusion bonded titan...[J],ENGINEERING FRACTURE MECHANICS,2016,163:176-188
- [27]Zhang Yongcun, Li Xiaobin, Liu Shutian, Zhang, YC (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Enhancing buckling capacity of a rectangular plate under uniaxial compression by utilizing an a...[J],CHINESE JOURNAL OF AERONAUTICS,2016,29(4):945-951
- [28]陈文炯, 刘书田, 张永存, Liu, Shutian(stliu@dlut.edu.cn).基于拓扑优化的自发热体冷却用植入式导热路径设计方法[J],力学学报,2016,48(2):406-412
- [29]张永存, 刘书田.On the optimal design of the graded metal honeycomb heat exchanger considering the 3D temperature...[A],2016
- [30]张永存, 刘书田.Investigation on the influence of Localized Unbonded-areas on the Crack Growth Characteristic of ...[A],2015
- [31]Zhao, Jian, Zhang, Yongcun, Gao, Renjing, Liu, Shutian, RJ (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..A new sensitivity improving approach for mass sensors through integrated optimization of both c...[J],SENSORS AND ACTUATORS B-CHEMICAL,2015,206:343-350
- [32]Zhang, Yongcun, Xu, Yanan, Liu, Shutian, ST (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..A fast numerical method for the analysis of the heat transfer performance of graded metallic ho...[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2014,79:507-517
- [33]张永存, 张飞, 尚士朋, 刘书田.考虑选材的连续体结构拓扑优化设计方法研究[A],2014,1-1
- [34]Zhang, Yongcun, Hou, Yupin, Liu, Shutian, ST (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian, Peoples R China..A new method of discrete optimization for cross-section selection of truss structures[J],ENGINEERING OPTIMIZATION,2014,46(8):1052-1073
- [35]Zhao, Jian, Liu, Shutian, Chen, Guoxi, Gao, Renjing, Yang, Yintang, Zhang, Yongcun, Huang, Yu, J (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Mechanical-Magnetic Coupling Analysis of a Novel Large Stroke Penta-Stable Mechanism Possessing...[J],JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME,2014,6(3)
- [36]Liu, Shutian, Chen, Wenjiong, Zhang, Yongcun, YC (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipments, Dalian, Peoples R China..Design optimization of porous fibrous material for maximizing absorption of sounds under set fr...[J],APPLIED ACOUSTICS,2014,76:319-328
- [37]李潇潇, 刘书田, 张永存, 朱艳坤.双稳态复合材料层合板跳转特性分析的解析模型[A],2014,1-1
- [38]Zhang Y., Zhang, Y., Dalian University of Technology, Dept of Engineering Mechanics, State Key Laboratory of Structural Analysis for Industrial EquipmentChina.New analytic model for heat transfer performance of metal foam[J],Energy Education Science and Technology Part A: Energy Science and Research,2014,32(6):8447-8458
- [39]张永存, 刘书田.Buckling behavior of compressive plate with negative poision’s ratio material[A],2014
- [40]张永存, 刘书田.Optimal design of multi-stage two-dimensional cellular-cored sandwich panel heat exchanger[J],Advanced in Mechanical Engineering,2014,428(623):1-9