location: Current position: Home >> Scientific Research >> Paper Publications

Adhesion enhancement of polyethylene modified by capacitively coupled radio frequency plasma polymerization of ethanol

Hits:

Indexed by:期刊论文

Date of Publication:2014-11-25

Journal:9th Asian European International Conference on Plasma Surface Engineering (AEPSE)

Included Journals:SCIE、EI、CPCI-S

Volume:259

Issue:PA

Page Number:77-82

ISSN No.:0257-8972

Key Words:Plasma polymerization; Polyethylene; Ethanol; Adhesion; Plasma nanotexturing; Conformal deposition

Abstract:The plasma polymerization of ethanol monomer was carried out under the capacitively coupled radio frequency plasma (CCP) of a radio frequency (RF) power of 100W at different power to flow rate (P/F) ratios of 0.7,1.0 and 2.7 W/sccm. The influence of the P/F ratios on deposition rate, chemical composition, surface morphology, and wettability were studied for the plasma polymer films of ethanol monomer on the pristine low density polyethylene (LDPE) surfaces and the surfaces under the oxygen CCP pretreatment of a RF power of 200 W for an exposure time of 1 and 5 min. The deposition rate of the plasma polymer films gradually increased with the P/F ratios. The retention of the hydroxyl groups decreased and the contents of the ketone, carboxylic acid, ester, ether, and epoxide groups increased in the plasma polymer films with the increased P/F ratios. The conformal deposition of the plasma polymer films to the LDPE surfaces was found on the pristine surfaces with the sub-micrometer asperities and the surfaces under oxygen CCP pretreatment with the nanotextures. The dynamic contact angle of the plasma polymer films increased with the P/F ratios on the LDPE surfaces with the sub-micrometer asperities. The plasma polymer films showed the decrease of the dynamic contact angle with the P/F ratios on the surfaces with the nanonodules and the nanopillar array. The significant improvement of the adhesion was achieved for LDPE samples with the nanonodules and the nanopillar array under the surface modification of the oxygen CCP pretreatment followed by the deposition of the plasma polymer films of ethanol monomer due to the cooperation adhesion mechanisms of the mechanical interlocking and the chemical bonding. (C) 2014 Elsevier B.V. All rights reserved.

Pre One:等离子体纳米织构化聚合物表面的浸润性转变

Next One:激光熔覆碳纳米管/氧化铝复合涂层工艺研究