location: Current position: Home >> Scientific Research >> Paper Publications

Effect of tin addition on primary silicon recovery in Si-Al melt during solidification refining of silicon

Hits:

Indexed by:期刊论文

Date of Publication:2013-05-15

Journal:JOURNAL OF CRYSTAL GROWTH

Included Journals:SCIE、EI

Volume:371

Page Number:1-6

ISSN No.:0022-0248

Key Words:Dendrite width; Primary silicon; Recovery rate; Tin addition

Abstract:Silicon (Si) waste and use of large amount of acid restrict the application of metallurgical grade silicon purification by Si-Al alloying process. To increase the recovery rate of primary Si, the effects of metal tin (Sn) addition on the recovery rate of primary Si were investigated in 31.86 at% Si-Al alloy. The actual recovery rate of primary Si is about 83% in Si-Al-Sn alloy with 10 at% Sn addition, which is higher than that of the 31.86 at% Si-Al alloy (62%). Sn addition tends to produce primary Si dendrites with larger widths. With the agglomeration of primary Si by Lorenz force considered, Sn addition is significant not only for resource recycling but also for environmental protection because of the reduced amount of acid used in the process. The impurities in primary Si and the impurity distribution in alloys were analyzed by inductively coupled plasma-mass spectrometry and electron probe microanalysis, respectively. Results show that Sn addition was favorable for the collection of boron in the Si-Al-Sn phase. (C) 2013 Elsevier B.V. All rights reserved.

Pre One:Effect of the addition of TEOS on the SiC fibers fabricated by electrospinning

Next One:冶金法制备太阳能级多晶硅研究现状及发展趋势