点击次数：

论文类型：期刊论文

发表时间：2012-10-01

发表刊物：THIN-WALLED STRUCTURES

收录刊物：SCIE、EI、ESI高被引论文、Scopus

卷号：59

页面范围：103-119

ISSN号：0263-8231

关键字：Tapered tube; Crashworthiness; Energy absorption; Multiobjective optimization; Oblique impact; Load uncertainty

摘要：In this paper, a class of axisymmetric thin-walled square (ATS) tubes with two types of geometries (straight and tapered) and two kinds of cross-sections (single-cell and multi-cell) are considered as energy absorbing components under oblique impact loading. The crash behavior of the four types of ATS tubes, namely single-cell straight (SCS), single-cell tapered (SCT), multi-cell straight (MCS) and multi-cell tapered (MCT), are first investigated by nonlinear finite element analysis through LS-DYNA. It is found that the MCT tube has the best crashworthiness performance under oblique impact regarding both specific energy absorption (SEA) and peak crushing force (PCF). Sampling designs of the MCT tube are created based on a four-level full factorial design of experiments (DoE) method. Parametric studies are performed using the DoE results to investigate the influences of the geometric parameters on the crash performance of such MCT tubes under oblique impact loading. In addition, multiobjective optimization design (MOD) of the MCT tube is performed by adopting multiobjective particle swarm optimization (MOPSO) algorithm to achieve maximum SEA capacity and minimum PCF with and without considering load angle uncertainty effect. During the MOD process, accurate surrogate models, more specifically, response surface (RS) models of SEA and PCF of the MCT tubes are established to reduce the computational cost of crash simulations by finite element method. It is found that the optimal designs of the MCT tubes are different under different load angles. It is also found that the weighting factors for different load angles are critical in the MOD of the MCT tubes with load angle uncertainty. (C) 2012 Elsevier Ltd. All rights reserved.