location: Current position: Home >> Scientific Research >> Paper Publications

Electrochemical hydrogen storage of the graphene sheets prepared by DC arc-discharge method

Hits:

Indexed by:期刊论文

Date of Publication:2013-08-15

Journal:8th Asian-European International Conference on Plasma Surface Engineering (AEPSE)

Included Journals:SCIE、EI、CPCI-S

Volume:228

Issue:SUPPL.1

Page Number:S120-S125

ISSN No.:0257-8972

Key Words:Graphene sheets; DC arc-discharge; Electrochemical hydrogen storage

Abstract:Graphene, as the fundamental two-dimensional carbon structure with exceptionally high crystal and electronic quality, had attracted increasing interest for its promising potential applications. In this article, the few-layer graphene sheets have been achieved by the direct current (DC) arc-discharge under hydrogen atmosphere, using pure graphite rods as the electrodes. The influence of hydrogen pressures (e.g. 0.03 MPa, 0.05 MPa, 0.07 MPa) on the products and their electrochemical properties for hydrogen storage were investigated. It is indicated that the graphene sheets were less than 10 layers and with the sizes in range of 200-500 nm. Among all graphene sheet samples, the highest capacity for electrochemical hydrogen storage was 147.8 mAh/g. Mechanism for electrochemical hydrogen insertion/desertion of such graphene sheet was discussed with respect to the single-layer graphene and multi-layer graphite. (C) 2012 Elsevier B.V. All rights reserved.

Pre One:Atomic single layer graphitic-C3N4: fabrication and its high photocatalytic performance under visible light irradiation

Next One:Hierarchically porous silicon with significantly improved photocatalytic oxidation capability for phenol degradation