Release Time:2019-03-11  Hits:

Indexed by: Conference Paper

Date of Publication: 2011-04-15

Included Journals: Scopus、SCIE、CPCI-S、EI

Volume: 16

Page Number: 807-811

Key Words: Sn-0.7Cu; zinc; shear; reflowing; microstructure; deposition

Abstract: Effect of zinc addition on the shear property evolution between Sn-0.7Cu solder alloy and their joints reflowed at 250 degrees C was investigated. The shear strength of Sn-0.7Cu/Cu joint was found to be higher than of Sn-0.7Cu solder alloy. Although a small addition of zinc element strengthened Sn-0.7Cu solder alloy, it decreased the shear strength of Sn-0.7Cu solder joints. Based on the fractography analysis and interfacial microstructure observation, it is proposed that the deposition of Cu-Zn intermetallic toward the interface during reflowing is largely responsible for the shear property evolution between the Sn-0.7Cu solder alloy and their joints. (c) 2010 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of Society for Automobile, Power and Energy Engineering