点击次数：

论文类型：期刊论文

发表时间：2014-08-01

发表刊物：POLYMER TESTING

收录刊物：SCIE、EI

卷号：37

页面范围：179-185

ISSN号：0142-9418

关键字：Poly(lactic acid); Self-nucleation; Crystallization kinetics; Morphology

摘要：The nonisothermal and isothermal crystallization behavior of pre-crystallized poly(lactic acid) (PLA) after partial or complete melting was investigated. After partial melting, the maximum crystallization peak shifts to higher temperature by 30 degrees C during subsequent cooling, indicating that self-nucleation greatly enhances the overall crystallization rate of PLA. Partial melting leads to predetermined athermal nucleation at higher temperature, while complete melting results in sporadic nucleation at lower temperature. Spherulitic and irregular morphologies are formed for the sample partially melted at 178 degrees C and 176 degrees C (or 175 degrees C), respectively. The isothermal crystallization data were analyzed by the Avrami model. The values of the Avrami exponent for partially melted PLA are comparable to that of completely melted material, indicating that self-nucleation does not change the crystallization mechanism of PLA. Irregular spherulites are formed for PLA partially melted at 176 degrees C during subsequent isothermal crystallization, and the nucleation density decreases with increasing crystallization temperature. (C) 2014 Elsevier Ltd. All rights reserved.