|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：力学与航空航天学院
联系方式：0411-84708390
扫描关注
- [1]Gong, Wenzheng, Gu, Junfeng, Ruan, Shilun, Shen, Changyu, SL (reprint author), Dalian Univ Technol, Dept Engn Mech, Key Lab Ind Equipment Struct Anal, Dalian 116024, Peoples R China..A high-strength electrospun PPESK fibrous membrane for lithium-ion battery separator[J],POLYMER BULLETIN,2019,76(10):5451-5462
- [2]龚文正, 谷俊峰, 阮诗伦, 申长雨, Ruan, Shilun(ruansl@dlut.edu.cn).静电纺丝制备高强度聚偏氟乙烯锂离子电池隔膜[J],高分子材料科学与工程,2019,35(3):148-155
- [3]张黎, 申长雨, 王新宇, 李征, 谷俊峰, 阮诗伦.熔融沉积3D打印材料粘接强度及模量预测研究[J],化工学报,2019,70(7):2727-2736
- [4]Gong, Wenzheng, Wang, Xinyu, Shen, Changyu, Li, Zheng, Gu, Junfeng, Ruan, Shilun, SL (reprint author), Dalian Univ Technol, Key Lab Ind Equipment Struct Anal, Dept Engn Mech, Dalian 116024, Peoples R China..A high-strength PPESK/PVDF fibrous membrane prepared by coaxial electrospinning for lithium-ion...[J],HIGH PERFORMANCE POLYMERS,2019,31(8):948-958
- [5]龚文正, 常保宁, 阮诗伦, 申长雨, Ruan, Shi-Lun(ruansl@dlut.edu.cn).静电纺丝聚芳醚砜酮纤维膜穿刺强度研究[J],材料工程,2019,47(4):32-38
- [6]Li, Zheng, Wang, Xinyu, Ruan, Shilun, Zhaojun, Shen, Changyu, Zeng, Yan, SL (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian, Liaoning, Peoples R China., Ruan, Int Res Ctr Computat Mech.A modified hypervolume based expected improvement for multi-objective efficient global optimiza...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2018,58(5):1961-1979
- [7]Chang, Baoning, Shen, Changyu, Ruan, Shilun, Gu, Junfeng, Li, Zheng, Long, Zhiqiang, Wang, Xinyu, SL (reprint author), Dalian Univ Technol, Dept Engn Mech, 2 Linggong Rd, Dalian 116024, Peoples R China..Constitutive modeling for the accurate characterization of the tension behavior of PEEK under s...[J],POLYMER TESTING,2018,69:514-521
- [8]龚文正, 周晶晶, 阮诗伦, 申长雨.静电纺丝与静电喷雾技术共纺制备PPESK/PVDF复合锂电池隔膜[J],材料工程,2018,46(3):1-6
- [9]Li, Zheng, Wang, Xinyu, Gu, Junfeng, Ruan, Shilun, Shen, Changyu, Lyu, Yan, Zhao, Yang, SL (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116023, Peoples R China..Topology Optimization for the Design of Conformal Cooling System in Thin-wall Injection Molding...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,94(1-4):1041-1059
- [10]Zhang, Huanhuan, Wang, Songjie, Shaoyuan, Ma, Ruixue, Cao, Wei, Liu, Chuntai, Shen, Changyu, Yaming, YM (reprint author), Zhengzhou Univ, Minist Educ, Key Lab Adv Mat Proc & Mold, Natl Engn Res Ctr Adv Polymer Proc Technol, Zhengzhou 450002, Henan, Peoples R China..Crystallization behavior of poly(lactic acid) with a self-assembly aryl amide nucleating agent ...[J],POLYMER TESTING,2017,64:12-19
- [11]肖博升, 王新宇, 李征, 谷俊峰, 阮诗伦, 申长雨.基于修正Archard模型的聚醚醚酮磨损数值模拟[J],工程塑料应用,2017,45(9):88-92,104
- [12]Wang, Yaming, Yu, Lin, Qing, Cao, Wei, Liu, Chuntai, Shen, Changyu, YM (reprint author), Zhengzhou Univ, Natl Engn Res Ctr Adv Polymer Proc Technol, Key Lab Adv Mat Proc & Mold, Minist Educ, Zhengzhou 450002, Peoples R China..Crystallization behavior of partially melted poly(ether ether ketone) Influence of pre-crystall...[J],JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY,2017,129(2):1021-1028
- [13]Zhang, Huanhuan, Shao, Chunguang, Kong, Weili, Wang, Yaming, Cao, Wei, Liu, Chuntai, Shen, Changyu, YM (reprint author), Zhengzhou Univ, Natl Engn Res Ctr Adv Polymer Proc Technol, Key Lab Adv Mat Proc & Mold, Minist Educ, Zhengzhou 450002, Peoples R China..Memory effect on the crystallization behavior of poly(lactic acid) probed by infrared spectrosc...[J],EUROPEAN POLYMER JOURNAL,2017,91:376-385
- [14]Gong W., Song B., Ruan S., Shen C..A novel PPESK fibrous membrane separator based on electrospinning technique for lithium-ion batte...[A],75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017,2017,2017-May:132-137
- [15]Wang, Xinyu, Minjie, Shen, Changyu, Ruan, Shilun, Li, Zheng, Gu, Junfeng, Hongxia, Z (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116023, Peoples R China..Pressure Analysis of Dynamic Injection Molding and Process Parameter Optimization for Reducing ...[J],POLYMERS,2017,9(3)
- [16]宋贝贝, 龚文正, 李宗蔚, 阮诗伦, 申长雨.静电纺无纺纤维膜与单根纤力学关系的研究[J],化工新型材料,2017,45(12):149-151
- [17]宋贝贝, 龚文正, 李宗蔚, 阮诗伦, 杨春秋, 申长雨.工艺参数对静电纺PPESK微纳米纤维膜性能的影响[J],工程塑料应用,2016,44(11):44-47
- [18]宋崇鑫, 宋贝贝, 龚文正, 阮诗论, 申长雨.同轴静电纺碳纳米管增强聚芳醚砜酮[A],2016,1
- [19]宋贝贝, 龚文正, 宋崇鑫, 阮诗论, 申长雨.孔隙率对静电纺丝正交试验优化结果的影响[A],2016,1
- [20]龚文正, 申长雨, 阮诗伦, 宋崇鑫, 宋贝贝.静电纺丝制备高强度PPESK锂离子电池隔膜[A],2016,1