个人信息Personal Information
教授
博士生导师
硕士生导师
性别:男
毕业院校:哈尔滨工业大学
学位:博士
所在单位:材料科学与工程学院
学科:材料加工工程
办公地点:铸造中心101
联系方式:0411-84706220
电子邮箱:jiejc@dlut.edu.cn
Influence of casting speed on fabricating Al-1% Mn and Al-10% Si alloy clad slab
点击次数:
论文类型:期刊论文
发表时间:2017-05-01
发表刊物:SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS
收录刊物:SCIE、EI
卷号:24
期号:3
页面范围:371-378
ISSN号:0792-1233
关键字:aluminum alloys; casting; interface; macrostructure; microstructure; semi-continuous; simulation
摘要:In this paper, the effect of casting speed on fabricating Al-1% Mn and Al-10% Si alloy clad slab was investigated. Before the trials with the semi-continuous casting process were conducted, a series of simulation with the engineering software FLUENT was made to forecast the influence of the casting speed on the temperature field and the liquid fraction of the clad slab. The simulation results indicated that the increase of the casting speed reduces the time in the cooling zone, thus the thickness of the Al-1% Mn solidification shell under the dividing plate gets thinner. Based on the simulation results, the Al-1% Mn alloy and Al-10% Si alloy clad slab was successfully produced by semi-continuous casting process. The interface of clad ingots was investigated by methods of metallographic and electron probe microanalysis. The tests on the interface confirmed the simulation results and showed that a clad slab of two different aluminum alloys with excellent metallurgical bonding was achieved by semi-continuous casting. According to the result of the tensile tests, the strength of the specimens remains at 110 MPa, and the fracture position located in the Al-1% Mn alloy indicates that the strength of the interface is higher than that of the Al-1% Mn alloy.