大连理工大学主页平台管理系统付雪松 Fretting fatigue characteristic of Ti-6Al-4V strengthened by wet peening 中文主页

论文成果

Fretting fatigue characteristic of Ti-6Al-4V strengthened by wet peening: 点击次数：; 发布时间： 2019-03-13; 发布时间：2019-03-13; 论文类型：期刊论文; 发表时间：2016-04-01; 发表刊物：INTERNATIONAL JOURNAL OF FATIGUE; 收录刊物：EI、SCIE; 卷号：85; 页面范围：65-69; ISSN号：0142-1123; 关键字：Ti-6Al-4V alloy; Wet peening; Local fatigue; Fretting fatigue; 摘要：This study investigated the effects of wet peening treatment on the fretting fatigue behavior and crack propagation in Ti-6Al-4V alloy. Wet peening induced a compressive residual stress at 0-160 mu m depth and enhanced the hardness at 0-80 mu m depth. Results of the fretting fatigue tests show that the fretting damage could efficiently reduce the. fatigue life of both the un-peened and wet peened samples. Moreover, wet peening could effectively increase the fretting fatigue resistance. Investigation on crack propagation mechanism revealed that the increased resistance is due to the synergistic effect of the enhanced hardness and the induced compressive residual stress in the wet peening modified layer. The enhanced hardness could resist the local fatigue in the fretting cracking stage and the compressive residual stress could retard crack growth. (C) 2015 Elsevier Ltd. All rights reserved.

上一条： High temperature deformation of non-directionally solidified Al2O3/YAG/ZrO2 eutectic bulk ceramic

下一条：Mechanical properties of strengthened surface layer in Ti6Al4V alloy induced by wet peening treatment

副教授博士生导师硕士生导师

性别：男

毕业院校：大连理工大学

学位：博士

所在单位：材料科学与工程学院

学科：材料加工工程

办公地点：大连理工大学铸造中工程心

电子邮箱：