|
个人信息Personal Information
副教授
硕士生导师
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：力学与航空航天学院
学科：制造工艺力学. 工程力学
办公地点：力学楼301
联系方式：Email:lizheng@dlut.edu.cn
电子邮箱：lizheng@dlut.edu.cn
扫描关注
- [1]Liu, Heng, Hong, Jie, Ruan, Shilun, Li, Zheng, Cheng, Gengdong, Z (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116023, Peoples R China., Li, Int Res Ctr Computat Mech.A Model accounting for Stiffness Weakening of Curvic Couplings under Various Loading Conditions[J],MATHEMATICAL PROBLEMS IN ENGINEERING,2020,2020
- [2]常旭阳, 王新宇, 李征, 谷俊峰, 阮诗伦, 申长雨, Gu, Junfeng(jfgu@dlut.edu.cn).聚醚醚酮物理老化行为与成型模拟[J],高分子材料科学与工程,2019,35(10):131-137
- [3]Yu, Minghao, Ruan, Shilun, Wang, Xinyu, Li, Zheng, Shen, Changyu, Z (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian, Peoples R China., Li, Int Res Ctr Computat Mech.Topology optimization of thermal-fluid problem using the MMC-based approach[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2019,60(1):151-165
- [4]Li, Zheng, Wang, Xinyu, Ruan, Shilun, Zhaojun, Shen, Changyu, Zeng, Yan, SL (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian, Liaoning, Peoples R China., Ruan, Int Res Ctr Computat Mech.A modified hypervolume based expected improvement for multi-objective efficient global optimiza...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2018,58(5):1961-1979
- [5]Fang, Haidong, Shen, Changyu, Ruan, Shilun, Li, Zheng, Gu, Junfeng, Wang, Xinyu, SL (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..A novel crystallization kinetics model of transcrystalline used for crystallization behavior si...[J],POLYMER ENGINEERING AND SCIENCE,2019,59(4):854-862
- [6]Yu, Wenqian, Ruan, Shilun, Li, Zheng, Shen, Changyu, Chen, Biaosong, Gu, Junfeng, Wang, Xinyu, XY (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Liaoning, Peoples R China..Effect of injection velocity on the filling behaviors of microinjection-molded polylactic acid ...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,103(5-8):2929-2940
- [7]Liu, Wenjuan, Wang, Xinyu, Li, Zheng, Gu, Junfeng, Ruan, Shilun, Shen, Changyu, Xicheng, JF (reprint author), Dalian Univ Technol, Fac Vehicle Engn & Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Integration optimization of molding and service for injection-molded product[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,84(9-12):2019-2028
- [8]Chang, Baoning, Wang, Xinyu, Long, Zhiqiang, Li, Zheng, Gu, Junfeng, Ruan, Shilun, Shen, Changyu, SL (reprint author), Dalian Univ Technol, Dept Engn Mech, 2 Linggong Rd, Dalian 116024, Peoples R China..Constitutive modeling for the accurate characterization of the tension behavior of PEEK under s...[J],POLYMER TESTING,2018,69:514-521
- [9]张黎, 王新宇, 李征, 谷俊峰, 阮诗伦, 申长雨.熔融沉积3D打印材料粘接强度及模量预测研究[J],化工学报,2019,70(7):2727-2736
- [10]Gong, Wenzheng, Wang, Xinyu, Li, Zheng, Gu, Junfeng, Ruan, Shilun, Shen, Changyu, SL (reprint author), Dalian Univ Technol, Key Lab Ind Equipment Struct Anal, Dept Engn Mech, Dalian 116024, Peoples R China..A high-strength PPESK/PVDF fibrous membrane prepared by coaxial electrospinning for lithium-ion...[J],HIGH PERFORMANCE POLYMERS,2019,31(8):948-958
- [11]李红霞, 付旭, 王敏杰, 李征, 李召军.汽轮发电机基础动力特性分析及优化设计[J],应用力学学报,2018,35(1):178-184
- [12]Li, Zheng, Wang, Xinyu, Gu, Junfeng, Ruan, Shilun, Shen, Changyu, Lyu, Yan, Zhao, Yang, SL (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116023, Peoples R China..Topology Optimization for the Design of Conformal Cooling System in Thin-wall Injection Molding...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,94(1-4):1041-1059
- [13]Wang, Xinyu, Li, Zheng, Hongxia, Ruan, Shilun, Gu, Junfeng, JF (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116023, Peoples R China..Influence of nanoscale surface curvature of rutile on fibronectin adsorption by atomistic simul...[J],JOURNAL OF MATERIALS SCIENCE,2017,52(23):13512-13521
- [14]肖博升, 王新宇, 李征, 谷俊峰, 阮诗伦, 申长雨.基于修正Archard模型的聚醚醚酮磨损数值模拟[J],工程塑料应用,2017,45(9):88-92,104
- [15]Wang, Xinyu, Li, Hongxia, Gu, Junfeng, Zheng, Ruan, Shilun, Shen, Changyu, Minjie, Z (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116023, Peoples R China..Pressure Analysis of Dynamic Injection Molding and Process Parameter Optimization for Reducing ...[J],POLYMERS,2017,9(3)
- [16]Li, Hongxia, Wang, Minjie, Zhao, Danyang, Qiao, Aike, Liu, Yahua, Xinyu, Wei, Yunbo, Tao, Gu, Junfeng, Zheng, HX (reprint author), Dalian Univ Technol, Sch Mech Engn, Dalian 116023, Peoples R China..Multi-Objective Optimizations of Biodegradable Polymer Stent Structure and Stent Microinjection...[J],POLYMERS,2017,9(1)
- [17]李宗蔚, 任梦柯, 宋贝贝, 阮诗伦, 李征, 王新宇.基于Fluent的三维注塑充填界面追踪方法研究[J],塑料工业,2016,44(12):28-32,45
- [18]Wang, Hong, Xicheng, Li, Zheng, Keqiu, H (reprint author), Dalian Neusoft Univ Informat, Dept Comp Sci & Technol, Dalian 116023, Peoples R China., Wang, Dalian Univ Technol.Kriging-Based Parameter Estimation Algorithm for Metabolic Networks Combined with Single-Dimens...[J],IEEE-ACM TRANSACTIONS ON COMPUTATIONAL BIOLOGY AND BIOINFORMATICS,2016,13(6):1142-1154
- [19]Li, Zheng, Ruan, Shilun, Gu, Junfeng, Wang, Xinyu, Shen, Changyu, Z (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Liaoning, Peoples R China..Investigation on parallel algorithms in efficient global optimization based on multiple points ...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2016,54(4):747-773
- [20]Wang, Xinyu, Li, Zheng, Gu, Junfeng, Shen, Changyu, Xicheng, Ruan, Shilun, JF (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Reducing service stress of the injection-molded polycarbonate window by optimizing mold constru...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,86(5-8):1691-1704