|
个人信息Personal Information
教授
博士生导师
硕士生导师
任职 : 国家重点研发计划首席
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：力学与航空航天学院
学科：车辆工程. 计算力学
办公地点：综合实验2号楼421A
联系方式：xuefeng@dlut.edu.cn
电子邮箱：xuefeng@dlut.edu.cn
扫描关注
论文成果
当前位置: 祝雪峰-大连理工大学 >> 科学研究 >> 论文成果- [61]胡平, 祝雪峰.考虑结构自重的基于NURBS插值的3D拓扑描述函数法研究[J],力学学报,2016,1(1):1-5
- [62]Zhou Yu, Xing Tong, Song Yue, Li Yajing, 祝雪峰, Li Guo, Ding Shuiting.Digital-twin-driven geometric optimization of centrifugal impeller with free-form blades for five...[J],JOURNAL OF MANUFACTURING SYSTEMS,2021,58:22-35
- [63]祝雪峰, 傅文谦, Xu Xiaojun.Intent Prediction of Pedestrians via Integration of Facial Expression and Human 2D Skeleton for A...[A],2021,1775-1780
- [64]侯文彬, 姜凯, 祝雪峰, 沈元星, 胡平.Extended isogeometric analysis using B plus plus splines for strong discontinuous problems[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2021,381:113779-
- [65]赵雅男, 刘笑晨, 鲁晗, 祝雪峰, 王天航, 罗根, 郑仁成, 罗一.An optimized deep convolutional neural network for yield prediction of Buchwald-Hartwig amination[J],CHEMICAL PHYSICS,2021,550:111296-
- [66]王长生, 祝雪峰, Zhang, Xiangkui.Quasi-conforming analysis method for trimmed CAD surfaces[J],EUROPEAN JOURNAL OF MECHANICS A-SOLIDS,2021,81
- [67]祝雪峰, Ji, Ye, 朱春钢, Hu, Ping, Ma, Zheng-Dong.Isogeometric analysis for trimmed CAD surfaces using multi-sided toric surface patches[J],COMPUTER AIDED GEOMETRIC DESIGN,2021,79
- [68]Hou, Wenbin, Jiang, Kai, 祝雪峰, Shen, Yuanxing, Li, Yongcheng, Zhang, Xiangkui, Hu, Ping.Extended Isogeometric Analysis with strong imposing essential boundary conditions for weak disc...[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2021,370
- [69]Gai, Yundong, Zhu, Xuefeng, Zhang, Yongjie Jessica, Hou, Wenbin, Hu, Ping, P (reprint author), Dalian Univ Technol, Sch Automot Engn, Dalian 116024, Peoples R China., Hu, State Key Lab Struct Anal Ind Equipment.Explicit isogeometric topology optimization based on moving morphable voids with closed B-splin...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2020,61(3):963-982
- [70]盖贇栋, 侯文彬, 祝雪峰, 胡平.检索矩形结构化网格中裁剪单元的数值算法[J],计算机辅助设计与图形学学报,2019,31(7):1203-1209
- [71]Ji, Fenzhu, Bao, Yangping, Zhou, Yu, Du, Farong, Zhu, Hongji, Zhao, Shuai, Li, Guo, Xuefeng, Ding, Shuiting, Y (reprint author), Beihang Univ, Beijing Key Lab High Efficient Power Transmiss &, Sch Transportat Sci & Engn, Beijing 100191, Peoples R China., Li, G (reprint author), Sch Energy & Power Engn.Investigation on performance and implementation of Tesla turbine in engine waste heat recovery[J],ENERGY CONVERSION AND MANAGEMENT,2019,179:326-338
- [72]Liu, Hongliang, Hao, Peng, Zhu, Xuefeng, Yang, Dixiong, DX (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dept Engn Mech, Int Res Ctr Computat Mech, Dalian 116023, Peoples R China..Isogeometric analysis based topology optimization design with global stress constraint[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2018,342:625-652
- [73]Yao, Baozhen, Yan, Qianqian, Chen, Qian, Tian, Zhihui, Zhu, Xuefeng, XF (reprint author), Dalian Univ Technol, Automot Engn Coll, Dalian 116024, Peoples R China..Simulation-based optimization for urban transportation demand management strategy[J],SIMULATION-TRANSACTIONS OF THE SOCIETY FOR MODELING AND SIMULATION INTERNATIONAL,2018,94(7,SI):637-647
- [74]刘宏亮, 祝雪峰, 杨迪雄.基于等几何分析的结构优化设计研究进展[J],固体力学学报,2018,03:248-267
- [75]Zhang, Xiangkui, Hu, Ping, Ma, Zheng-Dong, Zhu, Xuefeng, Wang, Changsheng, Liu, Haibo, Zhou, Yu, Gai, Yundong, Zhao, Chao, Zheng, Guojun, Hang, Zhizhou, XF (reprint author), Dalian Univ Technol, Sch Automot Engn, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China., Zhou, Y (reprint author), Beihang Univ, Beijing Key Lab High Efficient Power Transmiss &, Sch Transportat Sci & Engn, Beijing 100191.Initial solution estimation for one-step inverse isogeometric analysis in sheet metal stamping[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2018,330:629-645
- [76]张向奎, 刘光彬, 佟罡, 胡平, 申国哲, 王长生, 祝雪峰.基于深度学习的汽车冲压件缺陷预测[A],2018
- [77]Zhang, Xiangkui, Smith, Holly, Jin, Chunning, Hu, Ping, Zhu, Xuefeng, Hou, Wenbin, Xu, Jinting, Wang, Changsheng, Yuewei, Ma, Zheng-Dong.NURBS modeling and isogeometric shell analysis for complex tubular engineering structures[J],COMPUTATIONAL & APPLIED MATHEMATICS,2017,36(4):1659-1679
- [78]Sun, Yao, Yan, Qianqian, Jiang, Yonglei, Zhu, X.F., X.F.(xuefeng@dlut.edu.cn).Reliability prediction model of further bus service based on random forest[J],Journal of Algorithms and Computational Technology,2017,11(4):327-335
- [79]Hou, Wenbin, Gai, Yundong, Zhu, Xuefeng, Wang, Xuan, Zhao, Chao, Xu, Longkun, Jiang, Kai, Hu, Ping, XF (reprint author), Dalian Univ Technol, Sch Automot Engn, Dalian 116024, Peoples R China..Explicit isogeometric topology optimization using moving morphable components[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2017,326:694-712
- [80]Zhang, Weisheng, Chen, Jishun, Zhu, Xuefeng, Zhou, Jianhua, Xue, Dingchuan, Lei, Xin, Guo, Xu, X (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dept Engn Mech, Int Res Ctr Computat Mech, Dalian 116023, Peoples R China..Explicit three dimensional topology optimization via Moving Morphable Void (MMV) approach[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2017,322:590-614