• 更多栏目

    李鹏

    • 教授     博士生导师   硕士生导师
    • 性别:男
    • 毕业院校:西北工业大学
    • 学位:博士
    • 所在单位:材料科学与工程学院
    • 学科:材料连接技术. 材料加工工程
    • 办公地点:大连理工大学材料科学与工程学院铸造中心206室
    • 联系方式:一三四 七八五五 六八一六
    • 电子邮箱:lipeng2016@dlut.edu.cn

    访问量:

    开通时间:..

    最后更新时间:..

    Rotary friction welding of AlCoCrFeNi2.1 eutectic high entropy alloy

    点击次数:

    论文类型:期刊论文

    发表时间:2020-01-25

    发表刊物:JOURNAL OF ALLOYS AND COMPOUNDS

    收录刊物:EI、SCIE

    卷号:814

    ISSN号:0925-8388

    关键字:Eutectic high entropy alloy; Rotary friction welding; Microstructure; Tensile strength

    摘要:AlCoCrFeNi2.1 eutectic high entropy alloy was rotary friction welded, and the evolution of microstructure and the mechanical properties of the resultant joints were investigated. Compared with the base material, the amount of eutectic cells in the heat-affected zone decreased slightly, while most grains were bended and elongated in thermal-mechanically affected zone. Grain refinement occurred in the dynamic recrystallization zone. At friction pressure of 200 MPa, the tensile strength and elongation of the joint reached 913.5 MPa and 12.1%, which are over 100% of the base metal, and fracture occurred at the base metal region far away from the weld center. While decreasing the friction pressure to 120 MPa or 80 MPa, the tensile strength of the joint degraded by 12.5% and the fracture occurred at the weld interface in the dynamic recrystallization zone. The interface appeared due to the inadequate plastic deformation under lower friction pressure and the sluggish diffusion of AlCoCrFeNi2.1 eutectic high entropy alloy. (C) 2019 Elsevier B.V. All rights reserved.