个人信息Personal Information
副教授
博士生导师
硕士生导师
性别:男
毕业院校:明知大学
学位:博士
所在单位:环境学院
学科:环境工程. 环境科学
办公地点:大连理工大学西部校区环境楼 B701
联系方式:Email: zhanglei78@dlut.edu.cn Mobile: 13130499670
电子邮箱:zhanglei78@dlut.edu.cn
Importance of Initial Moisture Content and Bulking Agent for Biodrying Sewage Sludge
点击次数:
论文类型:期刊论文
发表时间:2014-01-25
发表刊物:14th Chinese Drying Conference (CDC)
收录刊物:SCIE、EI、CPCI-S
卷号:32
期号:2
页面范围:135-144
ISSN号:0737-3937
关键字:Biodegradable volatile solids; Biodrying; Bulking agent; Moisture content; Sewage sludge
摘要:For the final disposal and reutilization of organic wastes, reduction of moisture content (MC) is essential because water contained in the organic waste generates leachate, lowers energy content, and indirectly causes odor problems. MC also directly determines the drying cost. In this study, MC of sewage sludge was effectively decreased by applying a biodrying process in which the microbial metabolic heat evaporated the water. By controlling the initial MC through air drying and its subsequent biodrying, it was found that 50-70wt% was the optimal initial MC range for the sludge biodrying process. In this range, 33.7-47.1% of the initial water was removed by consuming 12.3-21.2% of the volatile solids (VS) initially contained in the sludge during 10 days of biodrying. When treating the same amount of raw sludge, air-dried and biodried sludge showed better performance as bulking agents than rubber and sawdust. About 55.1% of the initial water was removed from the mixture with air-dried sludge by consuming 23.8% of the initial VS and 38.3% of the initial water was lost from the sludge mixture with biodried sludge by consuming 14.0% of the initial VS during 12.1 days of biodrying. When rubber and sawdust were used as the bulking agents, only 18.2 and 16.5% of the initial water was removed, respectively. It was thought that the easily biodegradable VS contained in the air-dried sludge produced more heat and consequently removed more water. Although air-dried sludge showed better performance than biodried sludge, the use of biodried sludge as a bulking agent was thought to be more practical than air-dried sludge because biodried sludge can be used as bulking agent for the next round of biodrying in a repeated operation of the biodrying reactor. After biodrying, the lower heating value of the biodried sludge (51.5wt% of MC) was 14.644MJkg(-1), which was much higher than that of the original wet sludge.