58WI8AuduXaKdnPHsRTEKuIE3Q90IuRk55ttmG7A0YRNdXAWc6Sj6QjiUJtb

Electrohydrodynamic atomization deposition of PZT sol-gel slurry and sol infiltration on the films

Release Time:2019-03-09  Hits:

Indexed by: Journal Article

Date of Publication: 2012-07-01

Journal: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Included Journals: EI、SCIE

Volume: 32

Issue: 8

Page Number: 1651-1658

ISSN: 0955-2219

Key Words: Films; Suspensions; Ferroelectric properties; PZT; Electrohydrodynamic atomization

Abstract: This paper reports the use of a deposition technique, called electrohydrodynamic atomization, for producing PZT films from a composite sol-gel slurry. PZT slurries of different powder concentrations were prepared, and then atomization deposition of them was carried out and resultant films examined. It was observed that large splats with well-mixed PZT particles in sol and fine PZT clusters with dry PZT particle agglomeration can be deposited using this technique. In particular, intermediated sol infiltration process on the EHDA deposited film under optimized atomization condition was also studied. It was found that the film with sol infiltration process become more dense and the electrical properties (P-r, epsilon(r)) were improved compared with that without sol infiltration after EHDA deposition. (C) 2012 Elsevier Ltd. All rights reserved.

Prev One:Instrument for layer-by-layer deposition of catalyst layers directly on proton exchange membrane for direct methanol fuel cell

Next One:Formation of porous and dense Pt/C catalyst films using electrohydrodynamic atomisation deposition